Identification_Information: Citation: Citation_Information: Originator: Stephen M. Richard, Todd C. Shipman, Lizbeth C. Greene, and Raymond C. Harris Publication_Date: 08-01-2007 Title: Estimated Depth To Bedrock Of Arizona Geospatial_Data_Presentation_Form: vector digital data Series_Information: Series_Name: Arizona Geological Survey Digital Geologic Map 52 Issue_Identification: DGM-52 Publication_Information: Publication_Place: Tucson, AZ Publisher: Arizona Geological Survey Online_Linkage: www.azgs.az.gov Description: Abstract: The Arizona Basin and Range Province consists of broad alluvial valleys that separate low but rugged mountain ranges. The broad expanses of dry alluvial deposits and ephemeral streams that characterize the ba-sin areas belie their importance as water sources and their geologic complexity. These basins are geologically interesting as the record of late Cenozoic deformation in southwestern North America. They are economically interesting because of contained salt, anhydrite, manganese, uranium, clay, and zeolite resources, as well as the potential for metallic mineral deposits concealed beneath their sedimentary fill. The alluvial basins con-tain reservoirs of groundwater that are a vital resource for human occupants. An accurate geologic framework model of these basins is fundamental to scientific understanding of geologically recent continental tectonics, and to the discovery and managed development of the resources contained in the basins. This report provides a snapshot of current understanding of the subsurface geometry of the boundaries of Tertiary basin fill, which is a major component of the necessary geologic framework model. Purpose: This data set was developed as part of the Arizona Geological Survey's ongoing efforts to provide geologic information in a paper map and digital map format. The data can be used for analytical statistical purposes, planning and land management. Supplemental_Information: Definition of Bedrock and Basin For the purposes of this report, bedrock is thought of in hydrogeologic terms-that is rock that has suffi-ciently low bulk permeability that it could not be an aquifer. Basin fill is the term used to refer to the sedimen-tary (and locally volcanic) materials that fill Basin and Range basins, and is generally younger than about 15 million years in the southern part of the state and about 12 million years in the northwestern part of the state. This distinction is quite clear in situations in which non-consolidated alluvial material (sandy gravel) overlies indurated pre-Tertiary rock. It becomes much less clearly defined when the basin fill material in question is consolidated to some degree or contains volcanic layers, and the physiographic basin is bordered by Tertiary volcanic and sedimentary rocks that may not be well consolidated. The term basin is used with several meanings that need to be clearly distinguished for hydrogeologic pur-poses. 1. Physiographic basin. "a large or small depression in the surface of the land or ocean floor" (defi-nition 3a, http://www.m-w.com/dictionary/basin, Mirriam-Webster Online Dictionary). This is the sense used in the phrase 'Basin and Range'. 2. Drainage basin. "the entire track of country drained by a river and its tributaries" (definition 3b, http://www.m-w.com/dictionary/basin, Mirriam-Webster Online Dictionary). These are com-monly referred to as 'surface-water basins' or watersheds. 3. Groundwater basin. "A hydrologic unit of groundwater storage defined as an area more or less separate from neighboring groundwater storage areas." (http://ag.arizona.edu/AZWATER/reference/glossary/grndbasn.html), or "an area underlain by permeable materials capable of furnishing a significant supply of groundwater to wells or storing a significant amount of water. A groundwater basin is three-dimensional and includes both the surface extent and all of the subsurface fresh water yielding material." (http://www.groundwater.water.ca.gov/bulletin118/basin_maps/definition.cfm ) 4. Structural basin. "areas where the dip of strata is towards the center of the basin" (Neuendorfer et al., 2005), "a broad area of the earth beneath which the strata dip usually from the sides towards the center" (definition 4, http://www.m-w.com/dictionary/basin, Mirriam-Webster Online Dic-tionary). 5. Sedimentary basin. "any geographical feature exhibiting subsidence and consequent infilling by sedimentation" (Wikipedia, 6/7/2006, http://en.wikipedia.org/wiki/Sedimentary_basin). Denotes a region of sediment accumulation. The purpose of this map is to delineate sedimentary basins a portion of which contain low-density, rela-tively permeable sedimentary material. In the Basin and Range Province sedimentary basins are closely re-lated to groundwater basins because the sedimentary basin fill-material forms aquifers that contain large amounts of stored water. The boundaries between groundwater basins and sedimentary basins are closely re-lated because the geologic structures that form the boundaries of sediment accumulation zones commonly separate aquifer from non-permeable bedrock. Because the boundary between bedrock and basin fill is directly observable only in outcrops at the edges of a sedimentary basin or in relatively sparse point locations where boreholes penetrate the boundary, remote sensing methods are used to infer the depth to this boundary in almost all cases. Borehole data are used to constrain geophysical models that are mostly based on gravity data, supplemented in some areas by magnetic field data, seismic reflection, or other geophysical data. Surveys of slight variations in the local acceleration of gravity provide information about density differ-ences in subsurface materials. In general, unconsolidated sedimentary fill in late Tertiary basins is less dense than consolidated sediments and crystalline basement rocks. The measured variations in the acceleration of gravity can be compared with predicted variation based on models of subsurface geology and measured rock densities (see Sharma, 1976, chapter 3). This procedure is used to generate a subsurface model that is consis-tent with measured gravity variations, known rock distribution, and geologic reasoning. Gravity-based subsur-face models only constrain the depth to bedrock within a range of possible values. Consequently, the depth to bedrock map does not give exact depths. Other data are required to better constrain the interpretations, for instance drilling logs, cuttings and core, surface mapping, and other geophysical data such as seismic refrac-tion or magnetic field anomaly data. Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 08-01-2007 Currentness_Reference: publication date Status: Progress: Complete Maintenance_and_Update_Frequency: As needed Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -115.026818 East_Bounding_Coordinate: -108.913412 North_Bounding_Coordinate: 37.039212 South_Bounding_Coordinate: 31.277060 Keywords: Theme: Theme_Keyword: Geology Theme_Keyword: Bedrock Geology Theme_Keyword: Hydrology Theme_Keyword: Hydrogeology Theme_Keyword: Basin Theme_Keyword: Range Theme_Keyword: Basin and Range Theme_Keyword: Cenozoic Deformation Theme_Keyword: Physiographic basin Theme_Keyword: Drainage basin Theme_Keyword: Groundwater basin Theme_Keyword: Structural basin Theme_Keyword: Sedimentary basin Theme_Keyword: Borehole Theme: Theme: Theme: Place: Place_Keyword: United States of America Place_Keyword: Desert Place_Keyword: Southwest Place_Keyword: Arizona Access_Constraints: Although these data have been processed successfully on a computer system at the Arizona Geological Survey, no warranty expresses or implied is made regarding the accuracy or utility of the data on any system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. This disclaimer applies both to individual use of the data and aggregate use with other data. It is strongly recommended that these data are directly aquired from the Arizona Geological Survey, and not indirectly through other sources which may have changed the data in some way. It is also strongly recommended that careful attention be paid to the contents of the metadata file associated with these data. The Arizona Geological Survey shall not be held liable for improper or incorrect use of the data described and/or contained herein. Use_Constraints: Not to be reproduced for commercial purposes Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: Arizona Geological Survey Contact_Person: S. M. Richard Contact_Position: GIS Manager or GIS Technician Contact_Address: Address_Type: mailing and physical address Address: 416 W. Congress St., # 100 City: Tucson State_or_Province: Arizona Postal_Code: 85701 Country: U.S.A. Contact_Voice_Telephone: 520-770-3500 Contact_Facsimile_Telephone: 520-770-3505 Contact_Electronic_Mail_Address: http://www.azgs.state.az.us/ Hours_of_Service: 8:00 a.m to 5:00 p.m., M-F Contact_Instructions: Call, fax or e-mail the Arizona Geological Survey to order. Browse_Graphic: Browse_Graphic_File_Name: DGM-52(BrowseMap).jpg Browse_Graphic_File_Description: Basic Geologic Features (150dpi): polygons, lines and points Browse_Graphic_File_Type: JPEG & PDF formats Data_Set_Credit: Stephen M. Richard, Todd C. Shipman, Lizbeth C. Greene, and Raymond C. Harris Security_Information: Security_Classification: Unclassified Security_Handling_Description: This product is not for resale. Native_Data_Set_Environment: Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.2.0.1324 Cross_Reference: Citation_Information: Originator: Arizona Geological Survey Publication_Date: 08-01-2007 Title: DGM-52 Edition: Version 1.0 Geospatial_Data_Presentation_Form: Digital Map (CD-ROM) and paper map Series_Information: Series_Name: Digital Geologic Map 52 Issue_Identification: DGM-52 Publication_Information: Publication_Place: Tucson Arizona Publisher: Arizona Geological Survey Data_Quality_Information: Lineage: Source_Information: Source_Citation: Citation_Information: Originator: Arizona Geological Survey Publication_Date: 08-01-2007 Publication_Time: Unknown Title: Estimated Depth To Bedrock Of Arizona Edition: First Geospatial_Data_Presentation_Form: Paper Map and CD-ROM Series_Information: Series_Name: Digital Geologic Map 52 Issue_Identification: DGM-52 Publication_Information: Publication_Place: Tucson, Arizona Publisher: Arizona Geological Survey Source_Scale_Denominator: 1:1,100,000 Scale Type_of_Source_Media: Paper Map & CD-ROM Source_Time_Period_of_Content: Source_Currentness_Reference: publication date Source_Citation_Abbreviation: DGM-52 Source_Contribution: The U.S. Geological Survey Southwest Field Office (USGS SWFO) in Tucson originally digitized the Oppenheimer and Sumner (1980) depth to bedrock map. No metadata are available on original digitizing pro-cedure. The digital data were obtained by AZGS from USGS, and have been edited and updated as discussed. The TextDescription field in the shape-file data table contains more information on processing and data sources for individual contours. Citations in the feature level source information reference the bibliography at the end of this report. The 'MapHorizon' attribute of line features in the shape file represent depth to bedrock in feet beneath ground surface. See the metadata files associated with the shape files for more information on data structure. Digital data are in Universal Transverse Mercator projection (UTM Zone Number 12, North American Datum of 1927, ellipsoid of Clarke, 1866). Process_Step: Process_Description: METHODS, PROCEDURES, ASSUMPTIONS, AND CAVEATS Production of this data set began with a digitized version of contours for depths greater than or equal to 400 feet from a depth to bedrock map published by Oppenheimer and Sumner (1980). This data set was digi-tized from the published paper map by the U. S. Geological Survey (USGS) at the Southwest Field Office (SWFO) in Tucson, Arizona. No metadata are available on this original data automation activity. Depth to bedrock contours for this original map were obtained by extrapolating between 336 gravity profiles (about 22000 stations) along which 2-D models were constructed using a 2-layer geologic model to estimate the depth of the boundary between bedrock with a density greater than 2.67 g/cc and basin fill with a density varying between about 2.05 and 2.42 g/cm3 (Oppenheimer and Sumner, 1981). Depth to bedrock contours on the Oppenheimer and Sumner (1980) map were also constrained by 321 wells that either penetrated bedrock, or did not penetrate bedrock but are deep enough to constrain the depth to bedrock contours. The well locations and depths shown on Oppenheimer and Sumner (1980) were corre-lated where possible with permitted wells in the Arizona Oil and Gas Conservation Commission database of oil and gas wells (Rauzi and Richard, 2005). Oppenheimer (1980) reports that data for these wells are from well logs in U.S. Geological Survey files. Some of these wells appear to be included in the Arizona Depart-ment of Water Resources well database (Arizona Department of Water Resources, 2005), based on reported well depth matches. For gravity-modeling purposes, Oppenheimer and Sumner (1980, 1981) defined bedrock as "rock having a density of greater than 2.67 g/cc ". Oppenheimer (1980) argues that although the density of basin fill in-creases with depth, it "does not approach" the average density of bedrock (2.67 g/cc), and thus the density definition of bedrock does not differ greatly from the geologic definition of bedrock. In the gravity models used by Oppenheimer and Sumner (1980), the density of basin fill was inferred to vary inversely with the magnitude of the measured (negative) residual Bouguer gravity value (Fig. 6 in Oppenheimer and Sumner, 1981) between about 2.04 and 2.42 g/cm3. This assumption was based on the observation that more negative residual Bouguer gravity values are associated with thicker basin fill, and that the density of basin fill in-creases uniformly with thickness of overlying sediment (Tucci et al., 1982), thus the average density of a thicker basin-fill column is higher. The gravity modeling procedure of Oppenheimer and Sumner (1980), which assumes increasing average density with increasing basin fill thickness, will tend to overestimate the thickness of low-density basin fill. Saltus and Jachens (1995) also published a depth to bedrock map for the Basin and Range Province. The 'bedrock' on their map is apparently defined as pre-Cenozoic rock. Thus, basins depicted on the Saltus and Jachens (1995) map include accumulations of volcanic rock that are considered bedrock on the Oppenheimer and Sumner (1980) map. Saltus and Jachens' (1995) analysis used gravity stations on bedrock to estimate a bedrock gravity anomaly, and gravity anomalies related to lower-density basin fill were then calculate with respect to this basement gravity field. The analytical technique also uses well control to constrain the calcula-tion (see Saltus, 1991). Difference in analytical technique and definition of bedrock produces the obvious dis-crepancies between the maps in the Castle Dome Mountains, Ajo area, Superstition Mountains, and Peloncillo Mountains, among others. The basins shown by Saltus and Jachens (1995) in the Mohon Mountains, San Francisco Peaks area, and White Mountains are also thought to be due to the presence of voluminous Tertiary volcanic rocks. The basin depth map from Saltus and Jachens (1995) (Map C) was scanned at 150 dpi, and georeferenced to overlay with the other data sets for this update. A variety of additional sources of information were used to update the depth to bedrock contours from the Oppenheimer and Sumner (1980) map. Additional well control was added, including wells from the Oil and gas wells in the State of Arizona database (Rauzi and Richard, 2005) and files of the Arizona Oil and Gas conservation Commission (unpublished, Arizona Geological Survey), the Arizona Department of Water Re-sources Wells 55 (Arizona Department of Water Resources, 2005) and Groundwater Site Inventory (GWSI, see http://www.azwater.gov/dwr/Content/Find_by_Program/Hydrology/Basic_Data.htm) databases, an Ari-zona well inventory (Peirce and Scurlock, 1972), and from consultants' reports and journal articles. No well logs, cuttings, or cores were studied as part of this project. All depth to bedrock interpretations for drilling data are based on written data associated with the wells. Bedrock intercepts reported in water wells are gener-ally the boundary into hard rock, but in some wells may be to pre-Tertiary bedrock. The surface outcrop of bedrock is from the Geologic Map of Arizona (Richard et al., 2000). Other major sources of depth to bedrock information for this update are a variety of published basin studies (e.g. Bultman, 1999; Earman et al., 2003). These are cited in the reference list (below) and in the feature-level metadata (tracking records) linked to each contour line segment in the digital data file. Contour lines from Oppenheimer and Sumner (1980) were revised or, in places, replaced with new inter-pretations based on all the available information using map overlays in an ESRI ArcMap project. The greatest changes are in the interpretation of basin geometry away from the gravity profiles constructed by Oppen-heimer and Sumner (1980), where the Saltus and Jachens (1995) or other more recent basin studies were con-sidered more accurate depictions of subsurface geometry. Where bedrock outcrops were intersected by con-tours showing significant basin depth, the contour lines have been adjusted to be consistent with the bedrock outcrop. In some areas of generally flat-lying or gently tilted late Tertiary to Quaternary volcanic rocks, basin contours have been drawn to indicate suggested basin-fill accumulations beneath the volcanic rocks. Definition of a hydrologic depth to bedrock, i.e. thickness of potential aquifer, is complicated by a num-ber of factors. Depth-to-bedrock interpretations based on density contrast must be reconciled with interpreta-tion of the contact between Tertiary sandstone and conglomerate and mostly Tertiary volcanic rocks or pre-Tertiary rocks based on well log information. Many basins contain interbedded volcanic rocks, making defini-tion of a single depth impossible. In some cases, such as the San Bernardino and Sentinel volcanic fields, young basalt lavas apparently cover older basins that are otherwise similar to basins without the young vol-canic cover. In these cases, geologic bedrock is the indurated and denser rock that underlies sedimentary basin fill. In some basins (e.g. lower Gila River area, San Pedro Valley, Cienega Gap area), relatively thick, well indurated Oligocene to early Miocene sedimentary sequences are present. From a hydrologic point of view, such strata are more akin to bedrock and their density may be quite close to that of the bedrock, with a grada-tional transition into low-density basin fill. In well log descriptions, it may be quite difficult to distinguish the older, Oligocene to early Miocene sedimentary strata from flat lying basin fill. In basins within the Transition Zone (e.g. Verde Valley, Tonto Basin), which are undergoing deep dissection, definition of depth to bedrock is complicated by the fact that the thickness of basin fill may vary dramatically in different parts of the basin depending on the depth of dissection. Note that because of the presence of fine-grained, clay-rich (aquitard) facies in many basins, the potential yield of basin fill is not simply related to the basin fill thickness contoured on this map. Further refinement of this map will require a basin by basin analysis (see Ostenaa et al. (1993), Gettings and Houser (2000), and Langenheim et al. (2005) for examples). More refined modeling could be done using seismic, electromagnetic, and aeromagnetic data, as well as more sophisticated gravity modeling. Process_Date: Unknown Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: Arizona Geological Survey Contact_Person: Steve Richard Contact_Position: Geologist, GIS Manager, Geoinformatics Section Chief Contact_Address: Address_Type: mailing and physical address Address: 416 W. Congress St., Suite 100 City: Tucson State_or_Province: Arizona Postal_Code: 85701 Country: U.S.A. Contact_Voice_Telephone: (520) 770-3500 Contact_Facsimile_Telephone: (520) 770-3505 Contact_Electronic_Mail_Address: http://www.azgs.state.az.us/ Process_Step: Process_Description: Metadata imported. Source_Used_Citation_Abbreviation: \\Server1\public\DepthToBedrock\DGM package\metadata\DGM-53(NeedlesNE).xml Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Vector Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: G-polygon Point_and_Vector_Object_Count: 1109 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Grid_Coordinate_System: Grid_Coordinate_System_Name: Universal Transverse Mercator Universal_Transverse_Mercator: UTM_Zone_Number: 12 Transverse_Mercator: Scale_Factor_at_Central_Meridian: 0.999600 Longitude_of_Central_Meridian: -111.000000 Latitude_of_Projection_Origin: 0.000000 False_Easting: 500000.000000 False_Northing: 0.000000 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: coordinate pair Coordinate_Representation: Abscissa_Resolution: 0.000652 Ordinate_Resolution: 0.000652 Planar_Distance_Units: meters Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1927 Ellipsoid_Name: Clarke 1866 Semi-major_Axis: 6378206.400000 Denominator_of_Flattening_Ratio: 294.978698 Vertical_Coordinate_System_Definition: Altitude_System_Definition: Altitude_Resolution: 0.000028 Altitude_Encoding_Method: Explicit elevation coordinate included with horizontal coordinates Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Attribute: Attribute_Label: Originated from an ERSI Geodatabase Feature Class Attribute_Definition: Feature geometry. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Coordinates defining the features. Attribute: Attribute_Label: SysGUID Attribute: Attribute_Label: Label Attribute: Attribute_Label: DisplayName Attribute: Attribute_Label: TextDescription Attribute: Attribute_Label: MapHorizon Attribute: Attribute_Label: DepictionScale Attribute: Attribute_Label: ConceptTermGUID Attribute: Attribute_Label: ConceptEntityGUID Attribute: Attribute_Label: IdentityConfidenceTermGUID Attribute: Attribute_Label: CartoObjID Attribute: Attribute_Label: SymbolSet Attribute: Attribute_Label: TrackingNotes Attribute: Attribute_Label: OriginTrackingSysGUID Attribute: Attribute_Label: SysCreated Attribute: Attribute_Label: SysCreatedBy Attribute: Attribute_Label: SysUpdated Attribute: Attribute_Label: SysUpdatedBy Attribute: Attribute_Label: SysOwningRepositoryGUID Attribute: Attribute_Label: SysStatus Attribute: Attribute_Label: SysEditCount Attribute: Attribute_Label: Shape_Length Attribute_Definition: Length of feature in internal units. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Positive real numbers that are automatically generated. Attribute: Attribute_Label: Shape_Area Attribute_Definition: Area of feature in internal units squared. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Positive real numbers that are automatically generated. Attribute: Attribute_Label: OBJECTID Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: ESRISubType_GeologicUnitOutcrop Detailed_Description: Entity_Type: Entity_Type_Label: SymbolizeOutcropLink Detailed_Description: Entity_Type: Entity_Type_Label: GeologicUnitDescriptionOutcropExtentLink Detailed_Description: Entity_Type: Entity_Type_Label: FromOccurrenceToObservationLink Detailed_Description: Entity_Type: Entity_Type_Label: Anno_45_99 Detailed_Description: Entity_Type: Entity_Type_Label: Anno_45_104 Detailed_Description: Entity_Type: Entity_Type_Label: LeftSideGUOutcropLink Detailed_Description: Entity_Type: Entity_Type_Label: RightSideGUOutcropLink Overview_Description: Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: Arizona Geological Survey Contact_Position: Geologist, GIS Manager, Geoinformatics Section Chief Contact_Address: Address_Type: mailing and physical address Address: 416 W. Congress St., Suite 100 City: Tucson State_or_Province: Arizona Postal_Code: 85701 Country: U.S.A. Contact_Voice_Telephone: (520) 770-3500 Contact_Facsimile_Telephone: (520) 770-3505 Contact_Electronic_Mail_Address: http://www.azgs.state.az.us/ Hours_of_Service: 8:00 a.m. to 5:00 p.m. Monday through Friday Contact_Instructions: Call, fax or e-mail the Arizona Geological Survey to order. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: DGM (Digital Geologic Map) File_Decompression_Technique: no compression applied Digital_Transfer_Option: Offline_Option: Offline_Media: CD-ROM Ordering_Instructions: Call, fax or e-mail the Arizona Geological Survey to order. Turnaround: 5 to 10 Business days Available_Time_Period: Time_Period_Information: Single_Date/Time: Calendar_Date: 2007 Metadata_Reference_Information: Metadata_Date: 20070129 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: Arizona Geological Survey Contact_Position: Geologist, GIS Manager, Geoinformatics Section Chief Contact_Address: Address_Type: mailing and physical address Address: 416 W. Congress St., Suite 100 City: Tucson State_or_Province: Arizona Postal_Code: 85701 Country: U.S.A Contact_Voice_Telephone: (520) 770-3500 Contact_Facsimile_Telephone: (520) 770-3505 Contact_Electronic_Mail_Address: http://www.azgs.state.az.us/ Hours_of_Service: 8:00 a.m to 5:00 p.m., M-F Contact_Instructions: Call, fax or e-mail the Arizona Geological Survey to order. Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Time_Convention: local time Metadata_Extensions: Online_Linkage: http://www.esri.com/metadata/esriprof80.html Online_Linkage: http://www.azgs.state.az.us/ Online_Linkage: http://ncgmp.usgs.gov/ncgmpabout/statemap/statemapfs/AZ.pdf Profile_Name: ESRI Metadata Profile