We are upgrading the repository! A content freeze is in effect until December 6th, 2024 - no new submissions will be accepted; however, all content already published will remain publicly available. Please reach out to repository@u.library.arizona.edu with your questions, or if you are a UA affiliate who needs to make content available soon. Note that any new user accounts created after September 22, 2024 will need to be recreated by the user in November after our migration is completed.

Show simple item record

dc.contributor.advisorHuffman, D.en_US
dc.contributor.authorRosenwald, Ross Debner.
dc.creatorRosenwald, Ross Debner.en_US
dc.date.accessioned2011-10-31T17:23:23Z
dc.date.available2011-10-31T17:23:23Z
dc.date.issued1989en_US
dc.identifier.urihttp://hdl.handle.net/10150/184951
dc.description.abstractTwo new analysis methods for solar seismology are developed. Called the continuous orthonormalization (CON) and adjoint methods, their use enables both solar eigenfrequencies and eigenfrequency sensitivities (partial derivatives with respect to solar model parameters) to be computed more accurately and efficiently than with existing methods. The CON method integrates an eighth-order nonlinear system of ordinary differential equations (ODEs) which defines the linear adiabatic nonradial oscillation modes of the Sun. (The Cowling approximation is not used.) All normal modes of oscillation are treated identically, regardless of their type (pressure, gravity or fundamental) or their predominant location inside the Sun. The adjoint method integrates a related eighth-order linear inhomogeneous system of ODEs. From the resultant solution, an eigenfrequency's partial derivatives with respect to an extensive set of solar model parameters may be computed simultaneously. Extensive numerical tests confirm the validity of the two new methods. Eigenfrequencies obtained via the CON method have seven significant digits and match within 1% the eigenfrequencies obtained via finite difference or mesh approaches. (Exact agreement is neither expected nor attainable because differently defined solar models are analyzed. The CON method analyzes models which are functionally specified on a continuum of radial points; the other methods analyze models defined on discrete sets of radial points.) Eigenfrequency sensitivities obtained via the adjoint method match within 2% the results obtained by explicitly perturbing the solar model parameters and recomputing the eigenfrequencies. The usefulness and power of the two new methods are demonstrated by applying them to the solution of an elementary solar inversion problem. A sample solar model's f-mode frequencies (obtained via the CON method) are iteratively driven into agreement with an observed set of f-mode frequencies. Adjoint sensitivity results are used to alter solar model parameters within hundreds of radial bins. The frequency movement is large, comparable to the frequency separation between adjacent degree f-modes. Model changes are also large; the density near the base of the convection zone is roughly doubled, while slightly further out it is halved.
dc.language.isoenen_US
dc.publisherThe University of Arizona.en_US
dc.rightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.en_US
dc.subjectExtraterrestrial seismologyen_US
dc.subjectSun -- Measurementen_US
dc.subjectSolar oscillationsen_US
dc.titleThe development of the continuous orthonormalization and adjoint methods for solar seismology: Eigenfrequency computation and sensitivity analysis for direct and inverse problems.en_US
dc.typetexten_US
dc.typeDissertation-Reproduction (electronic)en_US
dc.identifier.oclc703618542en_US
thesis.degree.grantorUniversity of Arizonaen_US
thesis.degree.leveldoctoralen_US
dc.contributor.committeememberGarcia, J.Den_US
dc.contributor.committeememberThews, R. L.en_US
dc.contributor.committeememberWing, W.en_US
dc.contributor.committeememberVuillenin, J.en_US
dc.identifier.proquest9014679en_US
thesis.degree.disciplinePhysicsen_US
thesis.degree.disciplineGraduate Collegeen_US
thesis.degree.namePh.D.en_US
dc.description.noteThis item was digitized from a paper original and/or a microfilm copy. If you need higher-resolution images for any content in this item, please contact us at repository@u.library.arizona.edu.
dc.description.admin-noteOriginal file replaced with corrected file April 2023.
refterms.dateFOA2018-06-11T13:54:49Z
html.description.abstractTwo new analysis methods for solar seismology are developed. Called the continuous orthonormalization (CON) and adjoint methods, their use enables both solar eigenfrequencies and eigenfrequency sensitivities (partial derivatives with respect to solar model parameters) to be computed more accurately and efficiently than with existing methods. The CON method integrates an eighth-order nonlinear system of ordinary differential equations (ODEs) which defines the linear adiabatic nonradial oscillation modes of the Sun. (The Cowling approximation is not used.) All normal modes of oscillation are treated identically, regardless of their type (pressure, gravity or fundamental) or their predominant location inside the Sun. The adjoint method integrates a related eighth-order linear inhomogeneous system of ODEs. From the resultant solution, an eigenfrequency's partial derivatives with respect to an extensive set of solar model parameters may be computed simultaneously. Extensive numerical tests confirm the validity of the two new methods. Eigenfrequencies obtained via the CON method have seven significant digits and match within 1% the eigenfrequencies obtained via finite difference or mesh approaches. (Exact agreement is neither expected nor attainable because differently defined solar models are analyzed. The CON method analyzes models which are functionally specified on a continuum of radial points; the other methods analyze models defined on discrete sets of radial points.) Eigenfrequency sensitivities obtained via the adjoint method match within 2% the results obtained by explicitly perturbing the solar model parameters and recomputing the eigenfrequencies. The usefulness and power of the two new methods are demonstrated by applying them to the solution of an elementary solar inversion problem. A sample solar model's f-mode frequencies (obtained via the CON method) are iteratively driven into agreement with an observed set of f-mode frequencies. Adjoint sensitivity results are used to alter solar model parameters within hundreds of radial bins. The frequency movement is large, comparable to the frequency separation between adjacent degree f-modes. Model changes are also large; the density near the base of the convection zone is roughly doubled, while slightly further out it is halved.


Files in this item

Thumbnail
Name:
azu_td_9014679_sip1_c.pdf
Size:
21.59Mb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record