Show simple item record

dc.contributor.advisorKececioglu, Dimitri B.en_US
dc.contributor.authorJiang, Siyuan.
dc.creatorJiang, Siyuan.en_US
dc.date.accessioned2011-10-31T17:39:03Z
dc.date.available2011-10-31T17:39:03Z
dc.date.issued1991en_US
dc.identifier.urihttp://hdl.handle.net/10150/185481
dc.description.abstractThe finite mixed Weibull distribution is an appropriate distribution in modeling the lifetime of the units having more than one possible failure cause. Due to the lack of a systematic statistical procedure of fitting the distribution to a data set, it has not been widely used in lifetime data analyses. Many areas on this subject have been studied in this research. The following are the findings and contributions. Through a change of variable, 5 parameters in a two Weibull mixture can be reduced to 3. A parameter'vector (p₁, η, β) defines a family of two-Weibull mixtures which have common characteristics. Numerous probability plots are investigated on Weibull probability paper (WPP). For a given p₁ the η-β plane is partitioned into seven regions which are labeled by A through F and S. The Region S represents the two Weibull mixtures whose cdf curves are very close to a straight line. The Regions A through F represent six typical shapes of the cdf curves on WPP, respectively. The two-Weibull mixtures in one region have similar characteristics. Three important features of the two-Weibull mixture with well separated subpopulations are proved. Two existing methods for the graphical estimation of the parameters are discussed, and one is recommended over the other. The EM algorithm is successfully applied to solve the MLE for mixed Weibull distributions when m, the number of subpopulations in a mixture is known. The algorithms for complete, censored, grouped and suspended samples with non-postmortem and postmortem failures are developed accordingly. The developed algorithms are powerful, efficient and they are insensitive to the initial guesses. Extensive Monte Carlo simulations are performed. The distributions of the MLE of the parameters and of the reliability of a two Weibull mixture are studied. The MLEs of the parameters are sensitive to the degree of separation of the two subpopulation pdfs, but the MLE of the reliability is not. The generalized likelihood ratio (GLR) test is used to determine m. Under H₀: m=1 and H₁: m=m₁>1, ζ, the GLR is independent of the parameters in the distribution of H₀. The distributions of ζ or -21n(ζ) with n=50, 100 and 150 are obtained through Monte Carlo simulations. Compared with the chi-square distribution, they fall in between x²(4) and x²(6), and they are very close to x²(5). A FORTRAN computer program is developed to conduct simulation of the GLR test for 1 ≤ m₀ < m₁ ≤ 5.
dc.language.isoenen_US
dc.publisherThe University of Arizona.en_US
dc.rightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.en_US
dc.subjectWeibull distributionen_US
dc.subjectReliability (Engineering) -- Mathematical models.en_US
dc.titleMixed Weibull distributions in reliability engineering: Statistical models for the lifetime of units with multiple modes of failure.en_US
dc.typetexten_US
dc.typeDissertation-Reproduction (electronic)en_US
dc.identifier.oclc704432635en_US
thesis.degree.grantorUniversity of Arizonaen_US
thesis.degree.leveldoctoralen_US
dc.contributor.committeememberWirsching, Paul H.en_US
dc.contributor.committeememberSzidarovszky, Ferencen_US
dc.identifier.proquest9125459en_US
thesis.degree.disciplineAerospace and Mechanical Engineeringen_US
thesis.degree.disciplineGraduate Collegeen_US
thesis.degree.namePh.D.en_US
dc.description.noteThis item was digitized from a paper original and/or a microfilm copy. If you need higher-resolution images for any content in this item, please contact us at repository@u.library.arizona.edu.
dc.description.admin-noteOriginal file replaced with corrected file August 2023.
refterms.dateFOA2018-05-25T21:14:00Z
html.description.abstractThe finite mixed Weibull distribution is an appropriate distribution in modeling the lifetime of the units having more than one possible failure cause. Due to the lack of a systematic statistical procedure of fitting the distribution to a data set, it has not been widely used in lifetime data analyses. Many areas on this subject have been studied in this research. The following are the findings and contributions. Through a change of variable, 5 parameters in a two Weibull mixture can be reduced to 3. A parameter'vector (p₁, η, β) defines a family of two-Weibull mixtures which have common characteristics. Numerous probability plots are investigated on Weibull probability paper (WPP). For a given p₁ the η-β plane is partitioned into seven regions which are labeled by A through F and S. The Region S represents the two Weibull mixtures whose cdf curves are very close to a straight line. The Regions A through F represent six typical shapes of the cdf curves on WPP, respectively. The two-Weibull mixtures in one region have similar characteristics. Three important features of the two-Weibull mixture with well separated subpopulations are proved. Two existing methods for the graphical estimation of the parameters are discussed, and one is recommended over the other. The EM algorithm is successfully applied to solve the MLE for mixed Weibull distributions when m, the number of subpopulations in a mixture is known. The algorithms for complete, censored, grouped and suspended samples with non-postmortem and postmortem failures are developed accordingly. The developed algorithms are powerful, efficient and they are insensitive to the initial guesses. Extensive Monte Carlo simulations are performed. The distributions of the MLE of the parameters and of the reliability of a two Weibull mixture are studied. The MLEs of the parameters are sensitive to the degree of separation of the two subpopulation pdfs, but the MLE of the reliability is not. The generalized likelihood ratio (GLR) test is used to determine m. Under H₀: m=1 and H₁: m=m₁>1, ζ, the GLR is independent of the parameters in the distribution of H₀. The distributions of ζ or -21n(ζ) with n=50, 100 and 150 are obtained through Monte Carlo simulations. Compared with the chi-square distribution, they fall in between x²(4) and x²(6), and they are very close to x²(5). A FORTRAN computer program is developed to conduct simulation of the GLR test for 1 ≤ m₀ < m₁ ≤ 5.


Files in this item

Thumbnail
Name:
azu_td_9125459_sip1_c.pdf
Size:
6.676Mb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record