Show simple item record

dc.contributor.authorKosier, Steven Louie.
dc.creatorKosier, Steven Louie.en_US
dc.date.accessioned2011-10-31T18:18:41Z
dc.date.available2011-10-31T18:18:41Z
dc.date.issued1994en_US
dc.identifier.urihttp://hdl.handle.net/10150/186751
dc.description.abstractThe roles of net positive oxide trapped charge and surface recombination velocity in producing excess base current in bipolar junction transistors (BJTs) are identified. Although the interaction of these two quantities is physically complex, simple approaches for estimating their magnitude from measured BJT characteristics are presented. The oxide charge is estimated using a transition voltage in the plot of excess base current versus emitter bias. Two approaches for quantifying the effects of surface recombination velocity are described. The first measures surface recombination directly using a gated diode, while the second estimates its effects using an intercept current that is easily obtained from the BJT itself. The results are compared to two-dimensional simulations and measurements made on test structures. The techniques are simple to implement and provide insight into the mechanisms and magnitudes of the radiation-induced damage in BJTs. A physically-based comparison between hot-carrier and ionizing radiation stress in BJTs is presented as well. Although both types of stress lead to qualitatively similar changes in the current gain of the device, the physical mechanisms responsible for the degradation are quite different. Implications for correlating and comparing hot-carrier-induced and ionizing-radiation-induced damage are discussed. Finally, the worst-case increase in base current is shown to be dose-rate independent. This fact allows the worst-case response of bipolar devices to be determined using convenient laboratory dose rates.
dc.language.isoenen_US
dc.publisherThe University of Arizona.en_US
dc.rightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.en_US
dc.titleModeling gain degradation in bipolar junction transistors due to ionizing radiation and hot-carrier stressing.en_US
dc.typetexten_US
dc.typeDissertation-Reproduction (electronic)en_US
dc.contributor.chairSchrimpf, Ron D.en_US
thesis.degree.grantorUniversity of Arizonaen_US
thesis.degree.leveldoctoralen_US
dc.contributor.committeememberGalloway, Kenen_US
dc.contributor.committeememberParks, Harolden_US
dc.identifier.proquest9426579en_US
thesis.degree.disciplineElectrical and Computer Engineeringen_US
thesis.degree.disciplineGraduate Collegeen_US
thesis.degree.namePh.D.en_US
dc.description.noteThis item was digitized from a paper original and/or a microfilm copy. If you need higher-resolution images for any content in this item, please contact us at repository@u.library.arizona.edu.
dc.description.admin-noteOriginal file replaced with corrected file October 2023.
refterms.dateFOA2018-06-13T03:47:00Z
html.description.abstractThe roles of net positive oxide trapped charge and surface recombination velocity in producing excess base current in bipolar junction transistors (BJTs) are identified. Although the interaction of these two quantities is physically complex, simple approaches for estimating their magnitude from measured BJT characteristics are presented. The oxide charge is estimated using a transition voltage in the plot of excess base current versus emitter bias. Two approaches for quantifying the effects of surface recombination velocity are described. The first measures surface recombination directly using a gated diode, while the second estimates its effects using an intercept current that is easily obtained from the BJT itself. The results are compared to two-dimensional simulations and measurements made on test structures. The techniques are simple to implement and provide insight into the mechanisms and magnitudes of the radiation-induced damage in BJTs. A physically-based comparison between hot-carrier and ionizing radiation stress in BJTs is presented as well. Although both types of stress lead to qualitatively similar changes in the current gain of the device, the physical mechanisms responsible for the degradation are quite different. Implications for correlating and comparing hot-carrier-induced and ionizing-radiation-induced damage are discussed. Finally, the worst-case increase in base current is shown to be dose-rate independent. This fact allows the worst-case response of bipolar devices to be determined using convenient laboratory dose rates.


Files in this item

Thumbnail
Name:
azu_td_9426579_sip1_c.pdf
Size:
3.699Mb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record