Show simple item record

dc.contributor.advisorGlass, C. E.en_US
dc.contributor.authorSmith, William K
dc.creatorSmith, William Ken_US
dc.date.accessioned2013-04-18T10:05:31Z
dc.date.available2013-04-18T10:05:31Z
dc.date.issued1980en_US
dc.identifier.urihttp://hdl.handle.net/10150/282814
dc.description.abstractTime-dependent behavior of natural and excavated slopes in sedimentary rocks is a subject that is poorly understood at present but that is now an important consideration in the design, operation, and reclamation of energy-extraction facilities, in part because of the environmental considerations mandated by the Surface Mining Control and Reclamation Act of 1977 (Public Law 95-87). A slide in an abandoned, unreclaimed strip mine northwest of Sheridan, Wyoming, has been analyzed as an example of a long-term slope failure in the region. This slide occurred in early 1975, some 20 years after cessation of mining. This investigation used Spencer's limiting equilibrium method and an elastic-plastic finite element method incorporating the Drucker-Prager yield criterion. This slide was found to fit the model for time-dependent failure proposed by Nelson and Thompson (1977) in which the time to failure is related to Skempton's residual factor. The Nelson-Thompson hypothesis is extended for use with the three-dimensional Drucker-Prager yield criterion. The residual factor (R) may be computed from the factors of safety with respect to peak (F(p)) and residual (Fᵣ) material properties, using either the Mohr-Coulomb or Drucker-Prager criterion, by the relationship R = [(F(p) - 1)/(F(p)-Fᵣ)] At the present time, the Spencer limiting equilibrium analysis is a more usable tool for ordinary slope design than the elastic-plastic finite element analysis because of the speed, simplicity, and ease of including the effects of ground water in the Spencer analysis.
dc.language.isoen_USen_US
dc.publisherThe University of Arizona.en_US
dc.rightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.en_US
dc.subjectSlopes (Soil mechanics) -- Wyoming.en_US
dc.subjectCoal mine waste.en_US
dc.subjectLandslides.en_US
dc.subjectmaps
dc.titleLONG-TERM HIGHWALL STABILITY IN THE NORTHWESTERN POWDER RIVER BASIN, WYOMING AND MONTANAen_US
dc.typetexten_US
dc.typeDissertation-Reproduction (electronic)en_US
dc.typemaps
dc.identifier.oclc8692504en_US
thesis.degree.grantorUniversity of Arizonaen_US
thesis.degree.leveldoctoralen_US
dc.identifier.proquest8106930en_US
thesis.degree.disciplineGraduate Collegeen_US
thesis.degree.disciplineMining and Geological Engineeringen_US
thesis.degree.namePh.D.en_US
dc.identifier.bibrecord.b13909009en_US
refterms.dateFOA2018-06-12T13:47:39Z
html.description.abstractTime-dependent behavior of natural and excavated slopes in sedimentary rocks is a subject that is poorly understood at present but that is now an important consideration in the design, operation, and reclamation of energy-extraction facilities, in part because of the environmental considerations mandated by the Surface Mining Control and Reclamation Act of 1977 (Public Law 95-87). A slide in an abandoned, unreclaimed strip mine northwest of Sheridan, Wyoming, has been analyzed as an example of a long-term slope failure in the region. This slide occurred in early 1975, some 20 years after cessation of mining. This investigation used Spencer's limiting equilibrium method and an elastic-plastic finite element method incorporating the Drucker-Prager yield criterion. This slide was found to fit the model for time-dependent failure proposed by Nelson and Thompson (1977) in which the time to failure is related to Skempton's residual factor. The Nelson-Thompson hypothesis is extended for use with the three-dimensional Drucker-Prager yield criterion. The residual factor (R) may be computed from the factors of safety with respect to peak (F(p)) and residual (Fᵣ) material properties, using either the Mohr-Coulomb or Drucker-Prager criterion, by the relationship R = [(F(p) - 1)/(F(p)-Fᵣ)] At the present time, the Spencer limiting equilibrium analysis is a more usable tool for ordinary slope design than the elastic-plastic finite element analysis because of the speed, simplicity, and ease of including the effects of ground water in the Spencer analysis.


Files in this item

Thumbnail
Name:
azu_td_8106930_sip1_m.pdf
Size:
3.739Mb
Format:
PDF
Description:
Dissertation
Thumbnail
Name:
azu_td_E9791_1980_391_map1_m.jpg
Size:
2.439Mb
Format:
JPEG image
Description:
Table 2. Generalized Stratigraphic ...

This item appears in the following Collection(s)

Show simple item record