• Low Cost Vector Scoring System for Airborne Targets

      Whiteman, Don; Bradley, Joe; Naval Air Warfare Center, Weapons Division (International Foundation for Telemetering, 1994-10)
      Testing of airborne weapons systems often requires that a scoring system be placed on the target drone to obtain critical miss distance data. Advanced weapons utilizing directional warheads often require a scoring system which yields vector, miss distance and miss direction, information. Scalar scoring systems currently in use are relatively simple and inexpensive. Vector scoring systems are typically complex and the cost of systems which are currently available or are being developed can be prohibitively expensive. Due to the current military budget decline, development of a low cost vector scoring system is desirable This paper introduces a low cost vector scoring system developed for airborne target drones and based on an inexpensive scalar scoring system currently in use. To meet the low cost criteria, vector operation is achieved via minimal modifications to the existing scalar system.

      Lundberg, L. L.; Naval Air Warfare Center (International Foundation for Telemetering, 1994-10)

      Wu, Wei-Ren; Li, Hua; Beijing Research Institute of Telemetry (International Foundation for Telemetering, 1994-10)
      A real time distributed computer telemetry system based on network is described. It is a new generation of open telemetry system in China, which can parallel acquire and process up to 8 data streams of 100bps~3.5Mbps and optimize automatically distribution of processing tasks by using load-balance technique. PCM PSK QPSK PACM may be suitable to the system and the format switched within less than 1 second. The system has been successfully used in the field of aerospace. There are models of automobile, shipboard, airborne as well as ground station for the system. This paper discusses mainly system architecture, performance, principle, and system features.
    • Network Configuration for Range Interconnectivity

      Douglas, Steven R.; Naval Warfare Assessment Division (International Foundation for Telemetering, 1994-10)
      A demonstration of near real-time performance assessment for the Program Executive Officer for Cruise Missiles Project and Unmanned Aerial Vehicles, Cruise Test Directorate, PEO(CU)-CT, was conducted between 22 March 1994 through 4 May 1994. The demonstration involved the temporary installation of a portable TOMAHAWK telemetry recording and telecommunications capability at the Air Force Development Test Center range at Eglin Air Force Base, Florida and a receiving telecommunications capability at the Naval Warfare Assessment Division (NWAD), Corona, California. The system was successfully used on 4 May 1994 to record TOMAHAWK missile telemetry data in real-time in support of Operational Test Launch (OTL)-163 and to transfer that data to the weapons system performance analysts at NWAD in near real-time. The one hour and three minutes of flight data was compressed in real-time as it was recorded, then, after completion of the flight, the data was transferred to NWAD in about 12 minutes using the switched 56 kbps network. Additional transfers using the Defense Commercial Telecommunications Network (DCTN) were also conducted. All transfers were secured using ethernet encryptors. The data was processed by both the NWAD telemetry ground station and the TOMAHAWK workstation complex. This paper quantifies the results and documents the lessons learned from this demonstration and proposes a standardized system design for possible implementation at TOMAHAWK test range sites in the future. A position is taken that for situations where the remote site (e.g. other range or data analysis site) does not exercise direct operational control over the test/host range, near real-time data relay solutions are not only as adequate, but in many cases are preferable to real-time solutions.
    • A New Error Control Scheme for Remote Control System

      Zhou, Tingxian; Yin, Xiaohua; Zhao, Xianming; Harbin Institute of Technology (International Foundation for Telemetering, 1994-10)
      How to rise the reliability of the data transmission is one of the main problem faced by modern digital communication designers. This paper studies the error-correcting codes being suitable for the channel existing both the random and burst error. A new error control scheme is given. The scheme is a concatenated coding system using an interleaved Reed-Solomon code with symbols over GF (24) as the outer code and a Viterbi-decoded convolutional code as the inner code. As a result of the computer simulation, it is proved that the concatenated coding system has a output at a very low bit error rate (BER)and can correct a lot of compound error patterns. It is suitable for the serious disturb channel existing both the random and burst error. This scheme will be adopted for a remote control system.
    • On-Board Spacecraft Time-Keeping Mission System Design and Verification

      Wickham, Mark E.; Fairchild Space & Defense (International Foundation for Telemetering, 1994-10)
      Spacecraft on-board time keeping, to an accuracy better than 1 millisecond, is a requirement for many satellite missions. Scientific satellites must precisely "time tag" their data to allow it to be correlated with data produced by a network of ground and space based observatories. Multiple vehicle satellite missions, and satellite networks, sometimes require several spacecraft to execute tasks in time phased fashion with respect to absolute time. In all cases, mission systems designed to provide a high accuracy on-board clock must necessarily include mechanisms for the determination and correction of spacecraft clock error. In addition, an approach to on-orbit verification of these mechanisms may be required. Achieving this accuracy however need not introduce significant mission cost if the task of maintaining this accuracy is appropriately distributed across both the space and ground mission segments. This paper presents the mission systems approaches taken by two spacecraft programs to provide high accuracy on-board spacecraft clocks at minimum cost. The first, NASA Goddard Space Flight Center's (GSFC) Extreme Ultraviolet Explorer (EUVE) program demonstrated the ability to use the NASA Tracking and Data Relay Satellite System (TDRSS) mission environment to maintain an on-board spacecraft clock to within 100 microseconds of Naval Observatory Standard (NOS) Time. The second approach utilizes an on-board spacecraft Global Positioning System (GPS) receiver as a time reference for spacecraft clock tracking which is facilitated through the use of Fairchild's Telemetry and Command Processor (TCP) spacecraft Command & Data Handling Subsystem Unit. This approach was designed for a future Shuttle mission requiring the precise coordination of events among multiple space-vehicles.

      Morimoto, Todd A.; Nowitzky, Thomas E.; Grippando, Steven A.; Space & Missile Systems Center; Loral Space & Range Systems (International Foundation for Telemetering, 1994-10)
      An increasing number of satellite users and manufacturers are looking to lightweight, inexpensive satellites as substitutes to traditional large, expensive satellites with multiple payloads. Neither the Department of Defense nor the commercial sector can bear the financial or reputational consequences associated with massive program failures. With the low cost and weight of these new satellites, users can achieve mission success without great risk. One example of this new class of inexpensive spacecraft is the RADCAL (RADar CALibration) satellite. Detachment 2, Space & Missile Systems Center at Sunnyvale, CA operates the satellite. RADCAL is a 200-pound polar orbiting satellite with an average altitude of 450 miles. It is primarily used by 77 worldwide radars to calibrate their systems to within five meter accuracy. Also flying on board RADCAL is a communication payload for remote field users with small radios. The RADCAL program has satisfied all mission requirements. However, with the limited size and cost come certain challenges, both in the satellite and on the ground. Pre-launch testing was not as comprehensive as with more expensive programs; anomalies have arisen that require extensive workarounds. Data management is not a straightforward task, and it is sometimes difficult and inexact to track satellite performance. These challenges are presented with their solutions in the following discussion; this paper addresses the functional, operational, and testing aspects associated with the RADCAL satellite.
    • Optimum Symbol Synchronization

      James, Calvin L.; AlliedSignal Technical Services Corporation (International Foundation for Telemetering, 1994-10)
      Although most closed-loop synchronizers employ maximum likelihood estimators for symbol value decisions, in general, their symbol timing estimates are not optimum. It would seem only natural that an optimum timing estimator would choose interval partitions based on maximizing the observed sample signal-to-noise ratio. The symbol synchronizer described below achieves optimum performance when decisions on present symbol values are based on current and previously-received symbol samples. This procedure attempts to reestablish the interval independence criterion, thereby reducing timing estimator variance. The realization presented is motivated by an open-loop maximum a posteriori (MAP) structure analysis.

      Hui, Yang; Shanzhong, Li; Qishan, Zhang; Beijing University of Aeronautics and Astronautics (International Foundation for Telemetering, 1994-10)
      In this paper, a PCM telemetry system based on Personal computer is presented and some important methods that are used to realize the system will be introduced, such as a new kind of all digital PLL bit synchronizer and a way to solve the problem of high-rate data storage. The main idea of ours is to make the basic parts of PCM telemetry system (except receiver) in the form of PC cards compatible with EISA Bus, which forms a telemetry station with resource of PC computer. Finally, a laboratory prototype with rate up to 3.2Mbps is built.
    • Planned Evolution of Range Telemetry and Communications into the Public Data Network

      Erdahl, Mike; Loral Test & Information Systems (International Foundation for Telemetering, 1994-10)
      The area of range telemetry and communications has been under budget constraints and interoperability enhancement requirements for some time. The near-term onslaught of multimedia communications offerings by telephony and communications companies is certain to cause range engineering personnel to conduct extensive research and possibly make numerous decisions on procurements and technologies before standards are finalized. This paper will address a low-risk migration path for range telemetry to the new multimedia communications for ranges based on current capabilities. This migration path has an end goal of positioning the ranges to take advantage of future multimedia communications as they become available, while leveraging off of current products and procurements, without a major investment.
    • Portable Airborne Digital Data System Recorder

      Harris, Kevin E.; Veda Incorporated (International Foundation for Telemetering, 1994-10)
      Veda Incorporated has developed an airborne instrumentation recorder for a major commercial aircraft manufacturer. The recorder was developed for use in the aircraft company's Portable Airborne Digital Data System (PADDS), a small scale data acquisition and monitor system used for flight testing. The recorder is designed around an off-the-shelf 8mm tape drive, the Exabyte 8505. It records asynchronous, variable-rate data in a proprietary 24-bit recording format, and allows the data to be played back in real time. Its RS-422 control interface is designed to imitate the recorder used in the company's large scale data acquisition system, the Ampex DCRSi-II. Special provisions allow it to withstand the environment of an airplane's EE bay.

      Reinsmith, Lee V.; TYBRIN Corporation (International Foundation for Telemetering, 1994-10)
      This paper describes the application software used in the Message Processing System at the Air Force Development Test Center (AFDTC), Eglin AFB. The focus is on the Alpha AXP application software designed and developed to log, process, and reformat IRIG Chapter 8 1553 data. The main data reduction and editing capabilities of the processing phase are explained: message output selection, message output sampling, message translation, error identification, and IRIG Chapter 8 time editing. The design of and methods used to produce the output files, the BBNProbe STD file, and the 1553 message summary report are described. This software’s flexibility and comprehensiveness in processing, reducing, and re-formatting 1553 message data will enable AFDTC to satisfy current and future post-mission processing requirements.
    • Probability of Bit Error on a Standard IRIG Telemetry Channel Using the Aeronautical Fading Channel Model

      Nelson, N. Thomas; Brigham Young University (International Foundation for Telemetering, 1994-10)
      This paper analyzes the probability of bit error for PCM-FM over a standard IRIG channel subject to multipath interference modeled by the aeronautical fading channel. The aeronautical channel model assumes a mobile transmitter and a stationary receiver and specifies the correlation of the fading component. This model describes fading which is typical of that encountered at military test ranges. An expression for the bit error rate on the fading channel with a delay line demodulator is derived and compared with the error rate for the Gaussian channel. The increase in bit error rate over that of the Gaussian channel is determined along with the power penalty caused by the fading. In addition, the effects of several channel parameters on the probability of bit error are determined.
    • Processing Real-Time Telemetry with Multiple Embedded Processors

      BenDor, Jonathan; Baker, J. D.; Dovetail Systems Corporation; SEMCO (International Foundation for Telemetering, 1994-10)
      This paper describes a system in which multiple embedded processors are used for real-time processing of telemetry streams from satellites and radars. Embedded EPC-5 modules are plugged into VME slots in a Loral System 550. Telemetry streams are acquired and decommutated by the System 550, and selected parameters are packetized and appended to a mailbox which resides in VME memory. A Windows-based program continuously fetches packets from the mailbox, processes the data, writes to log files, displays processing results on screen, and sends messages via a modem connected to a serial port.
    • RadarMap: A Multi-Platformed Range Display Utility

      Rivero, Juan J.; Rarick, Michael J. (International Foundation for Telemetering, 1994-10)
      RadarMap is designed to take PCM-encoded radar data and process it to display the trace of radar targets on a map of the Eglin Test Range. Written in C, X Window, and OSF/Motif, RadarMap runs on a DECStation 5000/240 and utilizes the Loral Data Gathers C functions library to directly access PCM parameters from a Loral System 500 telemetry rack. X Window (a hardware-independent bitmapped graphics display system), OSF/Motif, and the Data Gathers libraries allow portability to other operating systems that support a C compiler and these libraries.

      O'Brien, R. Michael; Loral Test & Information Systems (International Foundation for Telemetering, 1994-10)
      With today's telemetry systems, an hour-long analog test tape can be digitized in one hour or less. However, the digitized data produced by today's telemetry systems is usually not in a format that can be directly analyzed by the test engineer's analysis tools. The digitized data must be formatted before analysis can begin. The data formatting process can take from one to eight hours depending on the amount of data, the power of the system's host computer, and the complexity of the analysis software's data format. If more than one analysis package is used by the test engineer, the data has to be formatted separately for each package. Using today's high-speed RISC processors and large memory technology, a real-time Flexible Data Formatter can be added to the Telemetry Front End to perform this formatting function. The Flexible Data Formatter (FDF) allows the telemetry user to program the front-end hardware to output the telemetry test data in a format compatible with the user's analysis software. The FDF can also output multiple data files, each in a different format for supporting multiple analysis packages. This eliminates the file formatting step, thus reducing the time to process the data from each test by a factor of two to nine.
    • A Real-Time Telemetry Data Processing System with Open System Architecture

      Jun, Zhang; MeiPing, Feng; Yanbo, Zhu; Bin, He; Qishan, Zhang; Beijing University of Aeronautics and Astronautics (International Foundation for Telemetering, 1994-10)
      In face of the characteristics of multiple data streams, high bit rate, variable data formats, complicated frame structure and changeable application environment, the programmable PCM telemetry system needs a new data processing system with advanced telemetry system architecture. This paper fully considers the characteristics of real-time telemetry data processing, analyzes the design of open system architecture for real-time telemetry data processing system(TDPS), presents an open system architecture scheme and design of real-time TDPS, gives the structure model of distributed network system, and develops the interface between network database and telemetry database, as well as telemetry processing software with man-machine interface. Finally, a practical and multi-functional real-time TDPS with open system architecture has been built, which based on UNIX operating system, supporting TCP/IP protocol and using Oracle relational database management system. This scheme and design have already proved to be efficient for real-time processing, high speed, mass storage and multi-user operation.
    • Recovery of Telemetered Data by Vertical Merging Algorithms

      Hoag, Joseph E.; Kalibjian, Jeffrey R.; Shih, Dwight; Toy, Edward J.; Lawrence Livermore National Laboratory; EL and Associates, Inc. (International Foundation for Telemetering, 1994-10)
      A long standing problem in telemetry applications is the recovery of data which has been damaged during downlink. Data recovery can be significantly improved by telemetering information in a packet format which employs redundant mechanisms for data encapsulation. A simple statistical algorithm (known as a "merge" algorithm) can be run on the captured data to derive a "least damaged" data set.

      Humpherys, Brian; Brigham Young University (International Foundation for Telemetering, 1994-10)
      This paper describes a method for determining high resolution time, space, and position information for a test range flight vehicle using four tracking receivers. Equipped with GPS time systems, each receiver records the exact time at which a time marker embedded in the transmitted TM data stream is received. With this information, the time difference of arrival for the time markers at three of the receivers can be calculated referenced to the fourth. Using this time difference, the position of the transmitter can be determined. The accuracy with which the received signal time delay can be calculated depends on the accuracy of the GPS time system at each receiver. The effect of time accuracy on positional resolution is evaluated.

      Jin, Minglu; Zhang, Qishan; Shenyang Institute of Aeronautical Engineering; Beijing University of Aero. & Astr. (International Foundation for Telemetering, 1994-10)
      In this paper, by using computer simulations, the interference of channel data in the SDM telemetry system is investigated, the performance of the copy demultiplexing is examined, and finally the selection rule of Walsh functions is recommended.