Show simple item record

dc.contributor.authorDunnaville, Ted
dc.contributor.authorLindsey, Mark
dc.date.accessioned2016-04-19T22:04:42Zen
dc.date.available2016-04-19T22:04:42Zen
dc.date.issued2009-10en
dc.identifier.issn0884-5123en
dc.identifier.issn0074-9079en
dc.identifier.urihttp://hdl.handle.net/10150/606007en
dc.descriptionITC/USA 2009 Conference Proceedings / The Forty-Fifth Annual International Telemetering Conference and Technical Exhibition / October 26-29, 2009 / Riviera Hotel & Convention Center, Las Vegas, Nevadaen_US
dc.description.abstractFlight test instrumentation/data processing environments consist of three components: * Airborne Data Acquisition System * Telemetry Control Room * Post Test Data Processing System While these three components require the same setup information, most often they are configured separately using a different tool for each system. Vendor supplied tools generally do not interact very well with hardware other than their own. This results in the multiple entry of the configuration information. Multiple entries of data for large complex systems are susceptible to data entry errors as well as version synchronization issues. This paper describes the successful implementation of a single Microsoft Excel based tool being used to program the instrumentation data acquisition hardware, the real-time telemetry system, and the post test data processing system on an active test program. This tool leverages the XML interfaces provided by vendors of telemetry equipment.
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.language.isoen_USen
dc.publisherInternational Foundation for Telemeteringen
dc.relation.urlhttp://www.telemetry.org/en
dc.rightsCopyright © held by the author; distribution rights International Foundation for Telemeteringen
dc.subjectInstrumentationen
dc.subjectData Acquisition Systemsen
dc.subjectTelemetryen
dc.subjectConfiguration Managementen
dc.subjectXMLen
dc.titleExcel Application Leverages XML to Configure Both Airborne Data Acquisition System and Ground Based Data Processing Systemen_US
dc.typetexten
dc.typeProceedingsen
dc.contributor.departmentLockheed Martin Aeronautics Companyen
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en
refterms.dateFOA2018-08-14T02:41:53Z
html.description.abstractFlight test instrumentation/data processing environments consist of three components: * Airborne Data Acquisition System * Telemetry Control Room * Post Test Data Processing System While these three components require the same setup information, most often they are configured separately using a different tool for each system. Vendor supplied tools generally do not interact very well with hardware other than their own. This results in the multiple entry of the configuration information. Multiple entries of data for large complex systems are susceptible to data entry errors as well as version synchronization issues. This paper describes the successful implementation of a single Microsoft Excel based tool being used to program the instrumentation data acquisition hardware, the real-time telemetry system, and the post test data processing system on an active test program. This tool leverages the XML interfaces provided by vendors of telemetry equipment.


Files in this item

Thumbnail
Name:
ITC_2009_09-08-01.pdf
Size:
200.2Kb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record