Show simple item record

dc.contributor.authorRose, B. E.
dc.date.accessioned2016-04-22T17:11:42Zen
dc.date.available2016-04-22T17:11:42Zen
dc.date.issued1969-09en
dc.identifier.issn0884-5123en
dc.identifier.issn0074-9079en
dc.identifier.urihttp://hdl.handle.net/10150/606676en
dc.descriptionInternational Telemetering Conference Proceedings / September 15-17, 1969 / Sheraton Park Hotel, Washington, D.C.en_US
dc.description.abstractA combining network is described which satisfies the requirements of low loss, compact size and input port selection capability. This power combiner, which follows a basic network scheme suggested by E. J. Wilkinson, uses helical wound quarter wave lines for impedance matching, relays for switching inputs in or out, and thick film resistors in the isolation network. The combiner was designed for a UHF solid-state transmitter for a communications satellite. The power level is in excess of 300 watts. From 8 to 16 inputs, from coherently driven power amplifiers, can be selected by command. This step level feature provides a very useful means to achieve maximum utilization of prime power as well as an improvement in reliability through redundancy. Design equations are given for the units. The results of a computer study of losses due to unequal input phases and amplitudes are presented. The equivalent circuit of the network, including parasitics, is described and the compensating elements are discussed. Tests have been made on the completed flight unit, and these results are plotted and discussed.
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.language.isoen_USen
dc.publisherInternational Foundation for Telemeteringen
dc.relation.urlhttp://www.telemetry.org/en
dc.rightsCopyright © International Foundation for Telemeteringen
dc.titleA Power Combiner for Step Level High Power UHF Solid State Transmittersen_US
dc.typetexten
dc.typeProceedingsen
dc.contributor.departmentHughes Aircraft Companyen
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en
refterms.dateFOA2018-09-11T09:24:12Z
html.description.abstractA combining network is described which satisfies the requirements of low loss, compact size and input port selection capability. This power combiner, which follows a basic network scheme suggested by E. J. Wilkinson, uses helical wound quarter wave lines for impedance matching, relays for switching inputs in or out, and thick film resistors in the isolation network. The combiner was designed for a UHF solid-state transmitter for a communications satellite. The power level is in excess of 300 watts. From 8 to 16 inputs, from coherently driven power amplifiers, can be selected by command. This step level feature provides a very useful means to achieve maximum utilization of prime power as well as an improvement in reliability through redundancy. Design equations are given for the units. The results of a computer study of losses due to unequal input phases and amplitudes are presented. The equivalent circuit of the network, including parasitics, is described and the compensating elements are discussed. Tests have been made on the completed flight unit, and these results are plotted and discussed.


Files in this item

Thumbnail
Name:
ITC_1969_69-02-4.pdf
Size:
316.1Kb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record