Show simple item record

dc.contributor.authorLaw, Eugene
dc.date.accessioned2016-04-22T18:39:24Zen
dc.date.available2016-04-22T18:39:24Zen
dc.date.issued2003-10en
dc.identifier.issn0884-5123en
dc.identifier.issn0074-9079en
dc.identifier.urihttp://hdl.handle.net/10150/606726en
dc.descriptionInternational Telemetering Conference Proceedings / October 20-23, 2003 / Riviera Hotel and Convention Center, Las Vegas, Nevadaen_US
dc.description.abstractThis paper will present equations for calculating the minimum recommended frequency separation of two digital telemetry signals. The signals can be filtered continuous phase frequency shift keying (CPFSK), multi-h continuous phase modulation (CPM) [1], shaped offset quadrature phase shift keying-Telemetry Group (SOQPSK-TG, aka SOQPSK-A*) [2], or Feher’s patented quadrature phase shift keying FQPSK-B (or FQPSK-JR [3]). The equations are based on measured data in an adjacent channel interference (ACI) environment for filtered CPFSK (aka PCM/FM), multi-h CPM (or CPM for short), SOQPSK-TG, FQPSK-JR, and FQPSK-B. This paper is an extension of my 2001 and 2002 International Telemetering Conference papers on this topic [4, 5]. The quantity measured was bit error probability (BEP) versus frequency separation at a given signal energy per bit to noise power spectral density ratio (Eb/No). The interferers were CPFSK, CPM, SOQPSK-TG or FQPSK-B (-JR) signals. The results presented in this paper will be for a desired signal bit rate of 1 to 20 Mb/s, one interferer 20 dB larger than the desired signal (a few tests included two interferers), and various center frequency spacings, interfering signals, receivers, and demodulators. The overall ACI test effort has collected data sets at several bit rates and with one and two interferers. The results will be useful to system designers and range operators as they attempt to maximize the number of Mb/s that can be simultaneously transmitted with minimal interference in the telemetry bands.
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.language.isoen_USen
dc.publisherInternational Foundation for Telemeteringen
dc.relation.urlhttp://www.telemetry.org/en
dc.rightsCopyright © International Foundation for Telemeteringen
dc.subjectAdjacent channel interferenceen
dc.subjectCPFSKen
dc.subjectPCM/FMen
dc.subjectFQPSK-Ben
dc.subjectFQPSK-JRen
dc.subjectCPMen
dc.subjectSOQPSKen
dc.subjectaeronautical telemetry signal spacingen
dc.titleRECOMMENDED MINIMUM TELEMETRY FREQUENCY SPACING WITH CPFSK, CPM, SOQPSK, AND FQPSK SIGNALSen_US
dc.typetexten
dc.typeProceedingsen
dc.contributor.departmentNaval Air System Commanden
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en
refterms.dateFOA2018-08-15T03:41:54Z
html.description.abstractThis paper will present equations for calculating the minimum recommended frequency separation of two digital telemetry signals. The signals can be filtered continuous phase frequency shift keying (CPFSK), multi-h continuous phase modulation (CPM) [1], shaped offset quadrature phase shift keying-Telemetry Group (SOQPSK-TG, aka SOQPSK-A*) [2], or Feher’s patented quadrature phase shift keying FQPSK-B (or FQPSK-JR [3]). The equations are based on measured data in an adjacent channel interference (ACI) environment for filtered CPFSK (aka PCM/FM), multi-h CPM (or CPM for short), SOQPSK-TG, FQPSK-JR, and FQPSK-B. This paper is an extension of my 2001 and 2002 International Telemetering Conference papers on this topic [4, 5]. The quantity measured was bit error probability (BEP) versus frequency separation at a given signal energy per bit to noise power spectral density ratio (Eb/No). The interferers were CPFSK, CPM, SOQPSK-TG or FQPSK-B (-JR) signals. The results presented in this paper will be for a desired signal bit rate of 1 to 20 Mb/s, one interferer 20 dB larger than the desired signal (a few tests included two interferers), and various center frequency spacings, interfering signals, receivers, and demodulators. The overall ACI test effort has collected data sets at several bit rates and with one and two interferers. The results will be useful to system designers and range operators as they attempt to maximize the number of Mb/s that can be simultaneously transmitted with minimal interference in the telemetry bands.


Files in this item

Thumbnail
Name:
ITC_2003_03-24-04.pdf
Size:
119.5Kb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record