Show simple item record

dc.contributor.authorZareba, Grzegorz
dc.date.accessioned2016-04-29T21:55:52Zen
dc.date.available2016-04-29T21:55:52Zen
dc.date.issued2001-10en
dc.identifier.issn0884-5123en
dc.identifier.issn0074-9079en
dc.identifier.urihttp://hdl.handle.net/10150/607572en
dc.descriptionInternational Telemetering Conference Proceedings / October 22-25, 2001 / Riviera Hotel and Convention Center, Las Vegas, Nevadaen_US
dc.description.abstractThis article presents a measurement system based on the RS-485 interface. The presented system is an alternative solution for distributed measurement systems, which cannot be built using IEEE-488 interface due to distance limitation between elements of the system. The RS-485 interface is a base for communication between measurement instruments and uses a Master-Slave protocol to exchange data between them. One dedicated master device, usually a PC, controls all slave devices connected to the interface. To control measurement devices SCPI language is used. This solution simplifies communication between measurement devices and allows utilizing the HP-VEE environment to control any SCPI devices connected to the RS-485 network.
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.language.isoen_USen
dc.publisherInternational Foundation for Telemeteringen
dc.relation.urlhttp://www.telemetry.org/en
dc.rightsCopyright © International Foundation for Telemeteringen
dc.subjectRS-485 Interfaceen
dc.subjectBus Networksen
dc.subjectSCPI Languageen
dc.subjectIEEE-488 Interfaceen
dc.subjectHP-VEE Environmenten
dc.subjectModBUS Protocolen
dc.titleRS-485 BASED MEASUREMENT SYSTEM WITH SCPI COMMAND SET CONTROLLED BY HP-VEE APPLICATIONen_US
dc.typetexten
dc.typeProceedingsen
dc.contributor.departmentUniversity of Arizonaen
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en
refterms.dateFOA2018-06-22T19:53:54Z
html.description.abstractThis article presents a measurement system based on the RS-485 interface. The presented system is an alternative solution for distributed measurement systems, which cannot be built using IEEE-488 interface due to distance limitation between elements of the system. The RS-485 interface is a base for communication between measurement instruments and uses a Master-Slave protocol to exchange data between them. One dedicated master device, usually a PC, controls all slave devices connected to the interface. To control measurement devices SCPI language is used. This solution simplifies communication between measurement devices and allows utilizing the HP-VEE environment to control any SCPI devices connected to the RS-485 network.


Files in this item

Thumbnail
Name:
ITC_2001_01-10-3.pdf
Size:
216.9Kb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record