TELEMETRY SIMULATOR PROVIDES PRE-MISSION VERIFICATION OF TELEMETRY RECEIVE SYSTEM
AuthorO'Cull, Douglas C.
Direct Digital Synthesis
MetadataShow full item record
RightsCopyright © International Foundation for Telemetering
Collection InformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.
AbstractWith the increased concerns for reducing cost and improving reliability in today's telemetry systems, many users are employing simulation and automation to guarantee reliable telemetry systems operation. Pre-Mission simulation of the telemetry system will reduce the cost associated with a loss of mission data. In order to guarantee the integrity of the receive system, the user must be able to simulate several conditions of the transmitted signal. These include Doppler shift and dynamic fade simulation. Additionally, the simulator should be capable of transmitting industry standard PCM data streams to allow pre-mission bit error rate testing of the receive system. Furthermore, the simulator should provide sufficient output power to allow use as a boresite transmitter to check all aspects of the receive link. Finally, the simulator must be able to operate at several frequency bands and modulation modes to keep cost to a minimum.
SponsorsInternational Foundation for Telemetering
Showing items related by title, author, creator and subject.
Simulating the Long House Valley: An evaluation of the role of agent-based computer simulation in archaeologyLittler, Matthew Laws, 1973- (The University of Arizona., 1998)This study presents the results of a detailed analysis of an agent-based computer simulation called Artificial Anasazi. The simulation attempts to replicate the population growth and settlement patterns of the prehistoric Kayenta Anasazi of Long House Valley in northeastern Arizona between A.D. 400-1300. Agent-based simulations model social evolution from the bottom-up, using heterogeneous agents that follow simple rules, in contrast to the top-down computer simulations usually used by archaeologists. Artificial Anasazi is tested against the archaeological record of the real Long House Valley through both qualitative and quantitative methods, and an analysis of the relevant ethnographic information is presented. The ultimate goal of this study is to elucidate the potentials and pitfalls of using agent-based computer simulation as a serious research tool in archaeology.
Behavioral simulation of digital to analog converters simulation of segmented current steering DAC with utilization of perfect sampling techniqueWarecki, Sylwester (The University of Arizona., 2003)Rapid progress in telecommunication and introduction of wireless phones has revolutionized the way, in which the analog signal is treated. High Radio Frequency (RF) pollution caused by increased number of subscribers imposes new requirements on the quality of transmitted RF signal. These requirements are met by introduction of Digital Direct Synthesis (DDS) of Intermediate Frequency (IF). The DDS eliminates the analog IF mixing stage, which is responsible interference with modulated signal. The high accuracy of DDS modulation is possible only with high quality digital-to-analog conversion. The design of Digital-to-Analog Converters (DAC) providing high-speed and high-resolution is extremely difficult. To overcome problems caused by manufacturing process variation numerous techniques such as thermometer coding or calibration are utilized in DAC design. However, in many cases implementation of these techniques becomes a source of new problems such as clock jitter or glitch. To solve them simulation of DAC, depicting numerous effects of physical phenomena, is an absolute necessity. Unfortunately such simulation with utilization of off-the-shelf mixed signal simulators is very demanding. Therefore simulation of all DAC circuit becomes impractical due to long simulation time or lack of good models of still studied phenomena such as glitch. A novel method allowing for simultaneous and accurate representation of numerous phenomena and significantly increasing simulation speed is proposed. The method is called a Perfect Sampling Technique (PST) and it allows for precise calculation of most important in telecommunication dynamic DAC performance metric---the Spurious Free Dynamic Range (SFDR). The technique was primarily built to overcome the deficiencies of popular Discrete Fourier Transform (DFT). This novel approach allows for concurrent simulation of the following phenomena: deterministic and random clock jitter, random and graded current source mismatch, and the glitch and output finite impedance. The implemented in Visual C++ simulator provides means of representation of various DAC structures: segmentation (thermometer and binary coding), 2D layout of current source matrix and analog switch dynamic characteristics. It utilizes behavioral models of DAC building blocks (analog switches) in custom-built extremely fast event driven simulation framework. It also provides means for parametric, statistical, transient and spectral analysis of DAC.
Aeronautical Channel Simulation in Network Simulators for Incorporation into OPNETDean, Richard; Zhang, Tianyin; Jaber, Nur; Morgan State University (International Foundation for Telemetering, 2010-10)This paper discusses channel simulation using OPNET Modeler in support of iNET. It shows how wireless communication is simulated, how to simulate the special aeronautical channel of iNET, and how to deliver the aeronautical channel, test article, and ground station as reusable components for future simulation. Network simulation is a critical tool for iNET and it enables design decisions that cannot be made analytically due to the complexity of the problem. This work addresses the incorporation of the aeronautical channel into the OPNET Modeler tool set as this piece of iNET is unique and is not available in OPNET Modeler.