AffiliationNew Mexico State University
MetadataShow full item record
RightsCopyright © International Foundation for Telemetering
Collection InformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.
AbstractMuch modem telemetry is transmitted in a digital format and to be compatible with existing range equipment the digital data is impressed on the carrier using FM modulation. The receiving system in common use employs an FM limiter/discriminator as a detector followed by an integrate and dump matched filter for bit detection. This system has been studied by previous authors  and it is well known that in the absence of frequency uncertainty the optimum transmission parameters consist of a modulation index of .7 (peak-to-peak deviation divided by the bit rate) and an IF filter bandwidth equal to the bit rate followed by a limiter discriminator. In many cases, there is a need for some small amount of analog telemetry transmission in addition to the digital data discussed above. In these cases it is common practice to include analog subcarriers on the main carrier with the digital data modulating the carrier at baseband, the resulting system is called PCM/FM + FM/FM. These hybrid analog/digital systems are the subject of this paper. In particular this paper addresses the performance of these systems through simulation using the Block Oriented System Simulator (BOSS) from Comdisco and with analytical techniques to obtain the BER versus SNR curves for these systems. The simulation is used over a wide range of parameters to find the optimum values of modulation index and IF bandwidth for these systems.
SponsorsInternational Foundation for Telemetering