Show simple item record

dc.contributor.authorCHIMENE, MARK C.
dc.date.accessioned2016-06-20T19:56:31Z
dc.date.available2016-06-20T19:56:31Z
dc.date.issued1990-11
dc.identifier.issn0884-5123
dc.identifier.issn0074-9079
dc.identifier.urihttp://hdl.handle.net/10150/613770
dc.descriptionInternational Telemetering Conference Proceedings / October 29-November 02, 1990 / Riviera Hotel and Convention Center, Las Vegas, Nevadaen_US
dc.description.abstractTelemetry system requirements are driven by technological developments in other areas, thus the capabilities of one are mirrored in the capabilities of the other. Contemporary systems typically involve two or more digital subsystems, each operating at a unique clock rate; an increase in complexity that needs to be addressed by the Telemetry system designer. Although the subsystems may be exchanging information, complete synchronization is seldom realized in discrete systems. Because the Telemetry system must provide information sufficient to isolate data/process corruption, it must accept data from the various subsytems at different rates and times. What is needed is a technique to de-couple the Telemetry system clock rate from that of the Subject system or any of its subsystems. This technique must bridge the gap between the synchronous data transmission fundamental to the Telemetry system and the asynchronous data transfer required by the various non integrated subsystems. This paper will discuss the design challenges offered by such a Subject system for both real time and post flight analysis. It will discuss how the restrictions imposed by the IRIG standards and anticipated mission requirements factored into developing the architecture for a Generic Multi-Port Digital Telemetry Interface.
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.language.isoen_USen
dc.publisherInternational Foundation for Telemeteringen
dc.relation.urlhttp://www.telemetry.org/en
dc.rightsCopyright © International Foundation for Telemeteringen
dc.titleARCHITECTURAL CONSIDERATIONS FOR A GENERIC MULTI-PORT DIGITAL INTERFACEen_US
dc.typetexten
dc.typeProceedingsen
dc.contributor.departmentROCKWELL INTERNATIONAL MISSILE SYSTEMS DIV.en
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en
refterms.dateFOA2018-06-16T05:42:33Z
html.description.abstractTelemetry system requirements are driven by technological developments in other areas, thus the capabilities of one are mirrored in the capabilities of the other. Contemporary systems typically involve two or more digital subsystems, each operating at a unique clock rate; an increase in complexity that needs to be addressed by the Telemetry system designer. Although the subsystems may be exchanging information, complete synchronization is seldom realized in discrete systems. Because the Telemetry system must provide information sufficient to isolate data/process corruption, it must accept data from the various subsytems at different rates and times. What is needed is a technique to de-couple the Telemetry system clock rate from that of the Subject system or any of its subsystems. This technique must bridge the gap between the synchronous data transmission fundamental to the Telemetry system and the asynchronous data transfer required by the various non integrated subsystems. This paper will discuss the design challenges offered by such a Subject system for both real time and post flight analysis. It will discuss how the restrictions imposed by the IRIG standards and anticipated mission requirements factored into developing the architecture for a Generic Multi-Port Digital Telemetry Interface.


Files in this item

Thumbnail
Name:
ITC_1990_90-797.pdf
Size:
18.74Kb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record