Show simple item record

dc.contributor.authorDapore, Mark
dc.date.accessioned2016-07-07T19:29:04Z
dc.date.available2016-07-07T19:29:04Z
dc.date.issued1985-10
dc.identifier.issn0884-5123
dc.identifier.issn0074-9079
dc.identifier.urihttp://hdl.handle.net/10150/615708
dc.descriptionInternational Telemetering Conference Proceedings / October 28-31, 1985 / Riviera Hotel, Las Vegas, Nevadaen_US
dc.description.abstractCommand Destruct Receivers are used on all launch vehicles for the purpose of initiating flight termination. The up-link command signal is a UHF carrier frequency modulated with Inter-Range Instrumentation Group (IRIG) audio tones. Typically three commands are used to control and terminate the flight: ARM, DESTRUCT, and OPTIONAL command. The combination and sequence of specified IRIG tones determines the command to be issued. The decoder portion of the command destruct receiver determines the presence and sequence of IRIG tones. Through the use of a microprocessor and digital signalprocessing-technology, Cincinnati Electronics has designed and developed a digital decoder which detects four IRIG tones simultaneously. The digital decoder provides stabilities and repeatabilities unattainable with analog decoders. Reliability and reproducibility are also superior when using the digital approach through the elimination of select and variable components. This improved performance of the decoder is a result of crystal controlled digital filtering and a constant false-alarm rate provided by the microprocessor. The digital filtering is achieved through Finite Impulse Response digital filters. There are a number of additional features provided by the digital decoder. Self-testing of portions of the receiver and correcting for temperature drift can be performed by the decoder. The digital decoder can have its command sequences reprogrammed in the field allowing separate control and termination of each vehicle in a multiple vehicle launch. Also, acceptance test data, date of manufacture, total time unit has been powered up, and other data can be stored inside the Command Destruct Receiver and recalled when needed.
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.language.isoen_USen
dc.publisherInternational Foundation for Telemeteringen
dc.relation.urlhttp://www.telemetry.org/en
dc.rightsCopyright © International Foundation for Telemeteringen
dc.titleDIGITAL DECODING IN RANGE SAFETY RECEIVERSen_US
dc.typetexten
dc.typeProceedingsen
dc.contributor.departmentCincinnati Electronics Corporationen
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en
refterms.dateFOA2018-09-11T14:23:43Z
html.description.abstractCommand Destruct Receivers are used on all launch vehicles for the purpose of initiating flight termination. The up-link command signal is a UHF carrier frequency modulated with Inter-Range Instrumentation Group (IRIG) audio tones. Typically three commands are used to control and terminate the flight: ARM, DESTRUCT, and OPTIONAL command. The combination and sequence of specified IRIG tones determines the command to be issued. The decoder portion of the command destruct receiver determines the presence and sequence of IRIG tones. Through the use of a microprocessor and digital signalprocessing-technology, Cincinnati Electronics has designed and developed a digital decoder which detects four IRIG tones simultaneously. The digital decoder provides stabilities and repeatabilities unattainable with analog decoders. Reliability and reproducibility are also superior when using the digital approach through the elimination of select and variable components. This improved performance of the decoder is a result of crystal controlled digital filtering and a constant false-alarm rate provided by the microprocessor. The digital filtering is achieved through Finite Impulse Response digital filters. There are a number of additional features provided by the digital decoder. Self-testing of portions of the receiver and correcting for temperature drift can be performed by the decoder. The digital decoder can have its command sequences reprogrammed in the field allowing separate control and termination of each vehicle in a multiple vehicle launch. Also, acceptance test data, date of manufacture, total time unit has been powered up, and other data can be stored inside the Command Destruct Receiver and recalled when needed.


Files in this item

Thumbnail
Name:
ITC_1985_85-0425.pdf
Size:
139.0Kb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record