An F/2 Focal Reducer For The 60-Inch U.S. Naval Observatory Telescope
dc.contributor.author | Meinel, Aden B. | |
dc.contributor.author | Wilkerson, Gary W. | |
dc.date.accessioned | 2016-12-13T21:00:46Z | |
dc.date.available | 2016-12-13T21:00:46Z | |
dc.date.issued | 1968-02-28 | |
dc.identifier.uri | http://hdl.handle.net/10150/621602 | |
dc.description | QC 351 A7 no. 07 | en |
dc.description.abstract | The Meinel Reducing Camera for the U. S. Naval Observatory's 60-inch telescope, Flagstaff, Arizona, comprises an f /10 collimator designed by Meinel and Wilkerson, and a Leica 50-mm f/2 Summicron camera lens. The collimator consists of a thick, 5-inch field lens located close to the focal plane of the telescope, plus four additional elements extending toward the camera. The collimator has an efl of 10 inches, yielding a 1-inch exit pupil that coincides with the camera's entrance pupil, 1.558 inches beyond the final surface of the collimator. There is room between the facing lenses of the collimator and camera to place filters and a grating. The collimated light here is the best possible situation for interference filters. Problems of the collimator design work included astigmatism due to the stop's being so far outside the collimator, and field curvature. Two computer programs were used in development of the collimator design. Initial work, begun in 1964, was with the University of Rochester's ORDEALS program (this was the first time the authors had used such a program) and was continued through July, 1965. Development subsequently was continued and completed on the Los Alamos Scientific Laboratory's program, LASL. The final design, completed January 24, 1966, was evaluated with ORDEALS. This project gave a good opportunity to compare ORDEALS, an "aberration" program, with LASL, a "ray deviation" program. It was felt that LASL was the superior program in this case, and some experimental runs beginning with flat slabs of glass indicated that it could have been used for the entire development of the collimator. Calculated optical performance of the design indicated that the reducing camera should be "seeing limited" for most work. Some astigmatism was apparent, but the amount did not turn out to be harmful in actual astronomical use. After the final design was arrived at, minor changes were made to accommodate actual glass indices of the final melt, and later to accommodate slight changes of radii and thicknesses of the elements as fabricated. An additional small change in spacing between two of the elements was made at the observatory after the reducing camera had been in use for a short time. The fabricated camera is working according to expectations. Some photographs are included in the report to illustrate its performance and utility. | |
dc.language.iso | en_US | en |
dc.publisher | Optical Sciences Center, University of Arizona (Tucson, Arizona) | en |
dc.relation.ispartofseries | Optical Sciences Technical Report 07 | en |
dc.rights | Copyright © Arizona Board of Regents | |
dc.subject | Optics. | en |
dc.subject | Optical Detection and Detectors | en |
dc.subject | TELESCOPES | en |
dc.subject | ASTRONOMICAL OBSERVATORIES | en |
dc.subject | ARIZONA | en |
dc.subject | FOCUSING | en |
dc.subject | MIRRORS | en |
dc.subject | PERFORMANCE(ENGINEERING) | en |
dc.subject | OPTICAL IMAGES | en |
dc.subject | THICKNESS | en |
dc.subject | COLLIMATORS | en |
dc.subject | GRATINGS(SPECTRA) | en |
dc.subject | HIGH SPEED CAMERAS | en |
dc.subject | COMPUTER PROGRAMS | en |
dc.subject | OPTICAL EQUIPMENT COMPONENTS | en |
dc.title | An F/2 Focal Reducer For The 60-Inch U.S. Naval Observatory Telescope | en_US |
dc.type | Technical Report | en |
dc.description.collectioninformation | This title from the Optical Sciences Technical Reports collection is made available by the College of Optical Sciences and the University Libraries, The University of Arizona. If you have questions about titles in this collection, please contact repository@u.library.arizona.edu. | |
refterms.dateFOA | 2018-07-11T08:13:27Z | |
html.description.abstract | The Meinel Reducing Camera for the U. S. Naval Observatory's 60-inch telescope, Flagstaff, Arizona, comprises an f /10 collimator designed by Meinel and Wilkerson, and a Leica 50-mm f/2 Summicron camera lens. The collimator consists of a thick, 5-inch field lens located close to the focal plane of the telescope, plus four additional elements extending toward the camera. The collimator has an efl of 10 inches, yielding a 1-inch exit pupil that coincides with the camera's entrance pupil, 1.558 inches beyond the final surface of the collimator. There is room between the facing lenses of the collimator and camera to place filters and a grating. The collimated light here is the best possible situation for interference filters. Problems of the collimator design work included astigmatism due to the stop's being so far outside the collimator, and field curvature. Two computer programs were used in development of the collimator design. Initial work, begun in 1964, was with the University of Rochester's ORDEALS program (this was the first time the authors had used such a program) and was continued through July, 1965. Development subsequently was continued and completed on the Los Alamos Scientific Laboratory's program, LASL. The final design, completed January 24, 1966, was evaluated with ORDEALS. This project gave a good opportunity to compare ORDEALS, an "aberration" program, with LASL, a "ray deviation" program. It was felt that LASL was the superior program in this case, and some experimental runs beginning with flat slabs of glass indicated that it could have been used for the entire development of the collimator. Calculated optical performance of the design indicated that the reducing camera should be "seeing limited" for most work. Some astigmatism was apparent, but the amount did not turn out to be harmful in actual astronomical use. After the final design was arrived at, minor changes were made to accommodate actual glass indices of the final melt, and later to accommodate slight changes of radii and thicknesses of the elements as fabricated. An additional small change in spacing between two of the elements was made at the observatory after the reducing camera had been in use for a short time. The fabricated camera is working according to expectations. Some photographs are included in the report to illustrate its performance and utility. |