Show simple item record

dc.contributor.advisorFleischman, Robert B.en
dc.contributor.authorZhang, Zhi
dc.creatorZhang, Zhien
dc.date.accessioned2017-08-25T17:15:37Z
dc.date.available2017-08-25T17:15:37Z
dc.date.issued2017
dc.identifier.urihttp://hdl.handle.net/10150/625385
dc.description.abstractThis dissertation describes the analytical research as part of a comprehensive research program to develop a new floor anchorage system for seismic resistant design, termed the Inertial Force-limiting Floor Anchorage System (IFAS). The IFAS intends to reduce damage in seismic resistant building structures by limiting the inertial force that develops in the building during earthquakes. The development of the IFAS is being conducted through a large research project involving both experimental and analytical research. This dissertation work focuses on analytical component of this research, which involves stand-alone computational simulation as well as analytical simulation in support of the experimental research (structural and shake table testing). The analytical research covered in this dissertation includes four major parts: (1) Examination of the fundamental dynamic behavior of structures possessing the IFAS (termed herein IFAS structures) by evaluation of simple two-degree of freedom systems (2DOF). The 2DOF system is based on a prototype structure, and simplified to represent only its fundamental mode response. Equations of motions are derived for the 2DOF system and used to find the optimum design space of the 2DOF system. The optimum design space is validated by transient analysis using earthquakes. (2) Evaluation of the effectiveness of IFAS designs for different design parameters through earthquake simulations of two-dimensional (2D) nonlinear numerical models of an evaluation structure. The models are based on a IFAS prototype developed by a fellow researcher on the project at Lehigh University. (3) Development and calibration of three-dimensional nonlinear numerical models of the shake table test specimen used in the experimental research. This model was used for predicting and designing the shake table testing program. (4) Analytical parameter studies of the calibrated shake table test model. These studies include: relating the shake table test performance to the previous evaluation structure analytical response, performing extended parametric analyses, and investigating and explaining certain unexpected shake table test responses. This dissertation describes the concept and scope of the analytical research, the analytical results, the conclusions, and suggests future work. The conclusions include analytical results that verify the IFAS effectiveness, show the potential of the IFAS in reducing building seismic demands, and provide an optimum design space of the IFAS.
dc.language.isoen_USen
dc.publisherThe University of Arizona.en
dc.rightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.en
dc.subjectEarthquake Engineeringen
dc.subjectFinite Element Analysisen
dc.subjectFloor Isolation Systemsen
dc.subjectLow-damage Systemsen
dc.subjectSeismic Response Reductionen
dc.subjectShake Table Testingen
dc.titleAnalytical Investigation of Inertial Force-Limiting Floor Anchorage System for Seismic Resistant Building Structuresen_US
dc.typetexten
dc.typeElectronic Dissertationen
thesis.degree.grantorUniversity of Arizonaen
thesis.degree.leveldoctoralen
dc.contributor.committeememberFleischman, Robert B.en
dc.contributor.committeememberZhang, Dichuanen
dc.contributor.committeememberKundu, Tribikramen
dc.contributor.committeememberJo, Hongkien
dc.description.releaseRelease after 21-Dec-2017en
thesis.degree.disciplineGraduate Collegeen
thesis.degree.disciplineCivil Engineering and Engineering Mechanicsen
thesis.degree.namePh.D.en
refterms.dateFOA2017-12-21T00:00:00Z
html.description.abstractThis dissertation describes the analytical research as part of a comprehensive research program to develop a new floor anchorage system for seismic resistant design, termed the Inertial Force-limiting Floor Anchorage System (IFAS). The IFAS intends to reduce damage in seismic resistant building structures by limiting the inertial force that develops in the building during earthquakes. The development of the IFAS is being conducted through a large research project involving both experimental and analytical research. This dissertation work focuses on analytical component of this research, which involves stand-alone computational simulation as well as analytical simulation in support of the experimental research (structural and shake table testing). The analytical research covered in this dissertation includes four major parts: (1) Examination of the fundamental dynamic behavior of structures possessing the IFAS (termed herein IFAS structures) by evaluation of simple two-degree of freedom systems (2DOF). The 2DOF system is based on a prototype structure, and simplified to represent only its fundamental mode response. Equations of motions are derived for the 2DOF system and used to find the optimum design space of the 2DOF system. The optimum design space is validated by transient analysis using earthquakes. (2) Evaluation of the effectiveness of IFAS designs for different design parameters through earthquake simulations of two-dimensional (2D) nonlinear numerical models of an evaluation structure. The models are based on a IFAS prototype developed by a fellow researcher on the project at Lehigh University. (3) Development and calibration of three-dimensional nonlinear numerical models of the shake table test specimen used in the experimental research. This model was used for predicting and designing the shake table testing program. (4) Analytical parameter studies of the calibrated shake table test model. These studies include: relating the shake table test performance to the previous evaluation structure analytical response, performing extended parametric analyses, and investigating and explaining certain unexpected shake table test responses. This dissertation describes the concept and scope of the analytical research, the analytical results, the conclusions, and suggests future work. The conclusions include analytical results that verify the IFAS effectiveness, show the potential of the IFAS in reducing building seismic demands, and provide an optimum design space of the IFAS.


Files in this item

Thumbnail
Name:
azu_etd_15466_sip1_m.pdf
Size:
16.76Mb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record