Browsing Radiocarbon, Volume 52, Number 3 (2010) by Authors
Blank Assessment for Ultra-Small Radiocarbon Samples: Chemical Extraction and Separation Versus AMSSantos, Guaciara M.; Southon, John R.; Drenzek, Nicholas J.; Ziolkowski, Lori A.; Druffel, Ellen; Xu, Xiaomei; Zhang, Dachun; Trumbore, Susan; Eglinton, Timothy I.; Hughen, Konrad A. (Department of Geosciences, The University of Arizona, 2010-01-01)The Keck Carbon Cycle AMS facility at the University of California, Irvine (KCCAMS/UCI) has developed protocols for analyzing radiocarbon in samples as small as ~0.001 mg of carbon (C). Mass-balance background corrections for modern and 14C-dead carbon contamination (MC and DC, respectively) can be assessed by measuring 14C-free and modern standards, respectively, using the same sample processing techniques that are applied to unknown samples. This approach can be validated by measuring secondary standards of similar size and 14C composition to the unknown samples. Ordinary sample processing (such as ABA or leaching pretreatment, combustion/graphitization, and handling) introduces MC contamination of ~0.6 +/- 0.3 g C, while DC is ~0.3 +/- 0.15 g C. Today, the laboratory routinely analyzes graphite samples as small as 0.015 mg C for external submissions and =0.001 mg C for internal research activities with a precision of ~1% for ~0.010 mg C. However, when analyzing ultra-small samples isolated by a series of complex chemical and chromatographic methods (such as individual compounds), integrated procedural blanks may be far larger and more variable than those associated with combustion/graphitization alone. In some instances, the mass ratio of these blanks to the compounds of interest may be so high that the reported 14C results are meaningless. Thus, the abundance and variability of both MC and DC contamination encountered during ultra-small sample analysis must be carefully and thoroughly evaluated. Four case studies are presented to illustrate how extraction chemistry blanks are determined.
Compound-Specific Radiocarbon Analyses of Phospholipid Fatty Acids and n-Alkanes in Ocean SedimentsDruffel, Ellen R. M.; Zhang, Dachun; Xu, Xiaomei; Ziolkowski, Lori A.; Southon, John R.; Dos Santos, Guaciara M.; Trumbore, Susan E. (Department of Geosciences, The University of Arizona, 2010-01-01)We report compound-specific radiocarbon analyses of organic matter in ocean sediments from the northeast Pacific Ocean. Chemical extractions and a preparative capillary gas chromatograph (PCGC) were used to isolate phospholipid fatty acids (PLFA) and n-alkanes from 3 cores collected off the coast of California, USA. Mass of samples for accelerator mass spectrometry (AMS) 14C analysis ranged from 13-100 g C. PLFA extracted from anaerobic sediments in the Santa Barbara Basin (595 m depth) had modern ∆14C values (-20 to +54), indicating bacterial utilization of surface-produced, post-bomb organic matter. Lower ∆14C values were obtained for n-alkanes and PLFA from coast (92 m depth) and continental slope (1866 m) sediments, which reflect sources of old organic matter and bioturbation. We present a brief analysis of the blank carbon introduced to samples during chemical processing and PCGC isolation.