Low-Rank Representation of Head Impact Kinematics: A Data-Driven Emulator
Affiliation
Univ Arizona, Dept Biomed EngnUniv Arizona, Dept Med, Arizona Ctr Aging ACOA
Univ Arizona, Div Geriatr Gen Internal Med & Palliat Med, Dept Med
Univ Arizona, Dept Aerosp & Mech Engn
Issue Date
2020-09-25Keywords
traumatic brain injuryconcussion
head impact kinematics
injury biomechanics
data-driven emulator
injury metrics
Metadata
Show full item recordPublisher
FRONTIERS MEDIA SACitation
Arrue, P., Toosizadeh, N., Babaee, H., & Laksari, K. (2020). Low-rank representation of head impact kinematics: A data-driven emulator. Frontiers in Bioengineering and Biotechnology,Rights
Copyright © 2020 Arrué, Toosizadeh, Babaee and Laksari. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY).Collection Information
This item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at repository@u.library.arizona.edu.Abstract
Head motion induced by impacts has been deemed as one of the most important measures in brain injury prediction, given that the vast majority of brain injury metrics use head kinematics as input. Recently, researchers have focused on using fast approaches, such as machine learning, to approximate brain deformation in real time for early brain injury diagnosis. However, training such models requires large number of kinematic measurements, and therefore data augmentation is required given the limited on-field measured data available. In this study we present a principal component analysis-based method that emulates an empirical low-rank substitution for head impact kinematics, while requiring low computational cost. In characterizing our existing data set of 537 head impacts, each consisting of 6 degrees of freedom measurements, we found that only a few modes, e.g., 15 in the case of angular velocity, is sufficient for accurate reconstruction of the entire data set. Furthermore, these modes are predominantly low frequency since over 70% of the angular velocity response can be captured by modes that have frequencies under 40 Hz. We compared our proposed method against existing impact parametrization methods and showed significantly better performance in injury prediction using a range of kinematic-based metrics-such as head injury criterion (HIC), rotational injury criterion (RIC), and brain injury metric (BrIC)-and brain tissue deformation-based metrics-such as brain angle metric (BAM), maximum principal strain (MPS), and axonal fiber strains (FS). In all cases, our approach reproduced injury metrics similar to the ground truth measurements with no significant difference, whereas the existing methods obtained significantly different (p< 0.01) values as well as substantial differences in injury classification sensitivity and specificity. This emulator will enable us to provide the necessary data augmentation to build a head impact kinematic data set of any size. The emulator and corresponding examples are available on our website(1).Note
Open access journalISSN
2296-4185Version
Final published versionSponsors
Comisión Nacional de Investigación Científica y Tecnológicaae974a485f413a2113503eed53cd6c53
10.3389/fbioe.2020.555493
Scopus Count
Collections
Except where otherwise noted, this item's license is described as Copyright © 2020 Arrué, Toosizadeh, Babaee and Laksari. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY).


