Physical properties of rocks from the upper part of the Yaxcopoil-1 drill hole, Chicxulub crater
MetadataShow full item record
CitationPopov, Y., Romushkevich, R., Bayuk, I., Korobkov, D., Mayr, S., Burkhardt, H., & Wilhelm, H. (2004). Physical properties of rocks from the upper part of the Yaxcopoil‐1 drill hole, Chicxulub crater. Meteoritics & Planetary Science, 39(6), 799-812.
PublisherThe Meteoritical Society
JournalMeteoritics & Planetary Science
AbstractPhysical properties were determined in a first step on post-impact tertiary limestones from the depth interval of 404-666 m of the Yaxcopoil-1 (Yax-1) scientific well, drilled in the Chicxulub impact crater (Mexico). Thermal conductivity, thermal diffusivity, density, and porosity were measured on 120 dry and water-saturated rocks with a core sampling interval of 2-2.5 m. Nondestructive, non-contact optical scanning technology was used for thermal property measurements including thermal anisotropy and inhomogeneity. Supplementary petrophysical properties (acoustic velocities, formation resisitivity factor, internal surface, and hydraulic permeability) were determined on a selected subgroup of representative samples to derive correlations with the densely measured parameters, establishing estimated depth logs to provide calibration values for the interpretation of geophysical data. Significant short- and long-scale variations of porosity (1-37%) turned out to be the dominant factor influencing thermal, acoustic, and hydraulic properties of this post impact limestone formation. Correspondingly, large variations of thermal conductivity, thermal diffusivity, acoustic velocities, and hydraulic permeability were found. These variations of physical properties allow us to subdivide the formation into several zones. A combination of experimental data on thermal conductivity for dry and water-saturated rocks and a theoretical model of effective thermal conductivity for heterogeneous media have been used to calculate thermal conductivity of mineral skeleton and pore aspect ratio for every core under study. The results on thermal parameters are the necessary basis for the determination of heat flow density, demonstrating the necessity of dense sampling in the case of inhomogeneous rock formations.