Impact lithologies and their emplacement in the Chixulub impact crater: Initial results from the Chicxulub Scientific Drilling Project, Yaxcopoil, Mexico
MetadataShow full item record
CitationKring, D. A., Hörz, F., Zurcher, L., & Urrutia Fucugauchi, J. (2004). Impact lithologies and their emplacement in the Chicxulub impact crater: Initial results from the Chicxulub Scientific Drilling Project, Yaxcopoil, Mexico. Meteoritics & Planetary Science, 39(6), 879-897.
PublisherThe Meteoritical Society
JournalMeteoritics & Planetary Science
AbstractThe Chicxulub Scientific Drilling Project (CSDP), Mexico, produced a continuous core of material from depths of 404 to 1511 m in the Yaxcopoil-1 (Yax-1) borehole, revealing (top to bottom) Tertiary marine sediments, polymict breccias, an impact melt unit, and one or more blocks of Cretaceous target sediments that are crosscut with impact-generated dikes, in a region that lies between the peak ring and final crater rim. The impact melt and breccias in the Yax-1 borehole are 100 m thick, which is approximately 1/5 the thickness of breccias and melts exposed in the Yucatán-6 exploration hole, which is also thought to be located between the peak ring and final rim of the Chicxulub crater. The sequence and composition of impact melts and breccias are grossly similar to those in the Yucatán-6 hole. Compared to breccias in other impact craters, the Chicxulub breccias are incredibly rich in silicate melt fragments (up to 84% versus 30 to 50%, for example, in the Ries). The melt in the Yax-1 hole was produced largely from the silicate basement lithologies that lie beneath a 3 km- thick carbonate platform in the target area. Small amounts of immiscible molten carbonate were ejected with the silicate melt, and clastic carbonate often forms the matrix of the polymict breccias. The melt unit appears to have been deposited while molten but brecciated after solidification. The melt fragments in the polymict breccias appear to have solidified in flight, before deposition, and fractured during transport and deposition.
Showing items related by title, author, creator and subject.
New impact-melt rock from the Roter Kamm impact structure, Namibia: Further constraints on impact age, melt rock chemistry, and projectile compositionHecht, L.; Reimold, W. U.; Sherlock, S.; Tagle, R.; Koeberl, C.; Schmitt, R.-T. (The Meteoritical Society, 2008-01-01)A new locality of in situ massive impact-melt rock was discovered on the southsouthwestern rim of the Roter Kamm impact structure. While the sub-samples from this new locality are relatively homogeneous at the hand specimen scale, and despite being from a nearby location, they do not have the same composition of the only previously analyzed impact-melt rock sample from Roter Kamm. Both Roter Kamm impact-melt rock samples analyzed to date, as well as several suevite samples, exhibit a granitic-granodioritic precursor composition. Micro-chemical analyses of glassy matrix and Al-rich orthopyroxene microphenocrysts demonstrate rapid cooling and chemical disequilibrium at small scales. Platinum-group element abundances and ratios indicate an ordinary chondritic composition for the Roter Kamm impactor. Laser argon dating of two sub-samples did not reproduce the previously obtained age of 3.7 +/- 0.3 (1-sigma) for this impact event, based on 40Ar/39Ar dating of a single vesicular impact-melt rock. Instead, we obtained ages between 3.9 and 6.3 Ma, with an inverse isochron age of 4.7 +/- 0.3 Ma for one analyzed sub-sample and 5.1 +/- 0.4 Ma for the other. Clearly a post-5 Ma impact at Roter Kamm remains indicated, but further analytical work is required to better constrain the currently best estimate of 4-5 Ma. Both impactor and age constraints are clearly obstructed by the inherent microscopic heterogeneity and disequilibrium melting and cooling processes demonstrated in the present study.
Facies distribution of post-impact sediments in the Ordovician Lockne and Tvaren impact craters: Indications for unique impact-generated environmentsFrisk, Å. M.; Ormö, J. (The Meteoritical Society, 2007-01-01)The Lockne and Tvären craters formed in the Late Ordovician Baltoscandian epicontinental sea. Both craters demonstrate similarities concerning near-synchronous age, target seabed, and succeeding resurge deposits; however, the water depths at the impact sites and the sizes of the craters were not alike. The post-impact sedimentary succession of carbonates, i.e., the Dalby Limestone, deposited on top of the resurge sediments in the two craters, is nevertheless similar. At least three main facies of the Dalby Limestone were established in the Lockne crater, depending on sea-floor topography, location with respect to the crater, and local water currents. The dominating nodular argillaceous facies, showing low values of inorganic carbon (IC), was distributed foremost in the deeper and quiet areas of the crater floor and depressions. At the crater rim, consisting of crushed crystalline basement ejecta, a rim facies with a reef-like fauna was established, most certainly due to topographical highs and substrate-derived nutrients. Between these facies are occurrences of a relatively thick-bedded calcilutite rich in cephalopods (cephalopod facies). In Tvären, the lower part of the succession consists of an analogous argillaceous facies, also showing similar low IC values as in Lockne, followed by calcareous mudstones with an increase of IC. Occasionally biocalcarenites with a distinctive fauna occur in the Tvären succession, probably originating as detritus from a facies developed on the rim. They are evident as peaks in IC and lows in organic carbon (Corg). The fauna in these biocalcarenites corresponds very well with those of erratic boulders derived from Tvären; moreover, they correspond to the rim facies of Lockne except for the inclusion of photosynthesizing algae, indicating shallower water at Tvären than Lockne. Consequently, we suggest equivalent distribution patterns for the carbonates of the Dalby Limestone in Lockne and Tvären.
Magnetostratigraphy of the impact breccias and post-impact carbonates from borehole Yaxcopoil-1, Chicxulub impact crater, Yucatán, MexicoRebolledo-Vieyra, M.; Urrutia-Fucugauchi, J. (The Meteoritical Society, 2004-01-01)We report the magnetostratigraphy of the sedimentary sequence between the impact breccias and the post-impact carbonate sequence conducted on samples recovered by Yaxcopoil-1 (Yax-1). Samples of impact breccias show reverse polarities that span up to ~56 cm into the postimpact carbonate lithologies. We correlate these breccias to those of PEMEX boreholes Yucatán-6 and Chicxulub-1, from which we tied our magnetostratigraphy to the radiometric age from a melt sample from the Yucatán-6 borehole. Thin section analyses of the carbonate samples showed a significant amount of dark minerals and glass shards that we identified as the magnetic carriers; therefore, we propose that the mechanism of magnetic acquisition within the carbonate rocks for the interval studied is detrital remanent magnetism (DRM). With these samples, we constructed the scale of geomagnetic polarities where we find two polarities within the sequence, a reverse polarity event within the impact breccias and the base of the post-impact carbonate sequence (up to 794.07 m), and a normal polarity event in the last ~20 cm of the interval studied. The polarities recorded in the sequence analyzed are interpreted to span from chron 29r to 29n, and we propose that the reverse polarity event lies within the 29r chron. The magnetostratigraphy of the sequence studied shows that the horizon at 794.11 m deep, interpreted as the K/T boundary, lies within the geomagnetic chron 29r, which contains the K/T boundary.