Primary Dendrite Trunk Diameter in Al-7wt% Si Alloy Directionally Solidified Aboard the International Space Station
Publisher
IOP PUBLISHING LTDCitation
Upadhyay, S. R., Tewari, S. N., Ghodes, M., Grugel, R. N., Poirier, D. R., & Lauer, M. (2019, May). Primary Dendrite Trunk Diameter in Al-7wt% Si Alloy Directionally Solidified Aboard the International Space Station. In IOP Conference Series: Materials Science and Engineering (Vol. 529, No. 1, p. 012022). IOP Publishing.Rights
© The Author(s). Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence.Collection Information
This item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at repository@u.library.arizona.edu.Abstract
Under a NASA (National Aeronautics and Space Agency)-ESA (European Space Agency) collaborative research project, MICAST (Microstructure formation in casting of technical alloys under a diffusive and magnetically controlled convection conditions), three Al-7wt% Si samples (MICAST-6, MICAST-7 and MICAST2-12) were directionally solidified at growth speeds varying from 10 to 50 mu m s(-1) aboard the International Space Station to determine the effect of mitigating convection on the primary dendrite array. The observed primary dendrite trunk diameters during steady-state growth of MICAST samples show a good agreement with predictions from a coarsening based model developed by the authors. The trunk diameters in the terrestrial-grown equivalent samples were larger than those predicted from the model. This suggest that thermosolutal convection increases the trunk diameter of primary dendrites, perhaps by increasing their tip radius due to compositional changes.Note
Open access journalISSN
1757-8981Version
Final published versionae974a485f413a2113503eed53cd6c53
10.1088/1757-899X/529/1/012022
Scopus Count
Collections
Except where otherwise noted, this item's license is described as © The Author(s). Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence.