Rangeland hillslope lengths: A case study at the Walnut Gulch Experimental Watershed, southeastern Arizona
Name:
1-s2.0-S2095633922000120-main.pdf
Size:
2.140Mb
Format:
PDF
Description:
Final Published Version
Affiliation
School of Natural Resources and the Environment, University of ArizonaIssue Date
2022
Metadata
Show full item recordCitation
Li, L., Nearing, M. A., Heilman, P., Nichols, M. H., Guertin, D. P., & Williams, C. J. (2022). Rangeland hillslope lengths: A case study at the Walnut Gulch Experimental Watershed, southeastern Arizona. International Soil and Water Conservation Research.Rights
Copyright © 2022 International Research and Training Center on Erosion and Sedimentation, China Water and Power Press, and China Institute of Water Resources and Hydropower Research. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Collection Information
This item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at repository@u.library.arizona.edu.Abstract
Rangeland hillslopes provide much of the sediment supplied to channel systems and their lengths exert a fundamental constraint on hillslope diffusive processes. However, information regarding lengths of rangeland hillslopes, and how best to estimate them, is limited. In this study, three groups of watersheds (10 in total) were selected from the Walnut Gulch Experimental Watershed according to their geology, soil and vegetation characteristics. Group 1 watersheds were at lower elevations dominated by shrubs, Group 3 were at high elevations dominated by grass, and Group 2 were mixed shrub and grass. Their hillslope lengths were calculated from 1 m-resolution DEMs using three methods: a flow routing algorithm, slope-area relationships, and inverted relationship with drainage density. Parameters that characterize the current watersheds, including Hack's exponent and coefficient, watershed shape coefficient, channel concavity and steepness, and surface roughness, were quantified and related to hillslope lengths. Results shows: (1) estimated hillslope lengths were different for the three methods and between the three groups of watersheds; (2) hillslope lengths that measured from the flow routing algorithm for the ten selected watersheds primarily ranged from 30 to 100 m, with a median value of 63.0 m, which was 20%–50% greater than those derived from slope-area plots or drainage densities; (3) hillslope lengths estimated from the flow routing method were greater in Group 3 watersheds than in Group 2 and then in Group 1 watersheds. We attributed these differences in hillslope lengths to the historic epeirogenic pulses, watershed and drainage network morphology, and differences in vegetation characteristics; (4) measured hillslope lengths from the flow routing algorithm were best correlated with hillslope relief, then surface roughness, channel steepness and concavity. These results would benefit the applications of hydrological and erosion models in rangelands. © 2022 International Research and Training Center on Erosion and Sedimentation, China Water and Power Press, and China Institute of Water Resources and Hydropower ResearchNote
Open access journalISSN
2095-6339Version
Final published versionae974a485f413a2113503eed53cd6c53
10.1016/j.iswcr.2022.02.004
Scopus Count
Collections
Except where otherwise noted, this item's license is described as Copyright © 2022 International Research and Training Center on Erosion and Sedimentation, China Water and Power Press, and China Institute of Water Resources and Hydropower Research. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).