Show simple item record

dc.contributor.authorKe, X.
dc.contributor.authorWang, T.
dc.contributor.authorZhang, Z.
dc.contributor.authorHuang, L.
dc.contributor.authorWang, C.
dc.contributor.authorNegi, V.S.
dc.contributor.authorPullen, W.C.
dc.contributor.authorChoi, H.
dc.contributor.authorKim, D.
dc.contributor.authorIdir, M.
dc.date.accessioned2022-06-10T23:13:50Z
dc.date.available2022-06-10T23:13:50Z
dc.date.issued2022
dc.identifier.citationKe, X., Wang, T., Zhang, Z., Huang, L., Wang, C., Negi, V. S., Pullen, W. C., Choi, H., Kim, D., & Idir, M. (2022). Multi-tool optimization for computer controlled optical surfacing. Optics Express, 30(10), 16957–16972.
dc.identifier.issn1094-4087
dc.identifier.doi10.1364/OE.456855
dc.identifier.urihttp://hdl.handle.net/10150/665115
dc.description.abstractWith the rapid development of precision technologies, the demand of high-precision optical surfaces has drastically increased. These optical surfaces are mainly fabricated with computer controlled optical surfacing (CCOS). In a CCOS process, a target surface removal profile is achieved by scheduling the dwell time for a set of machine tools. The optimized dwell time should be positive and smooth to ensure convergence to the target while considering CNC dynamics. The total run time of each machine tool is also expected to be balanced to improve the overall processing efficiency. In the past few decades, dwell time optimization for a single machine tool has been extensively developed. While the methods are applicable to multi-tool scenarios, they fail to consider the overall contributions of multiple tools simultaneously. In this paper, we conduct a systematic study on the strategies for multi-tool dwell time optimization and propose an innovative method for simultaneously scheduling dwell time for multiple tools for the first time. First, the influential factors to the positiveness and smoothness of dwell time solutions for a single machine tool are analyzed. The compensation strategies that minimize the residual while considering the CNC dynamics limit are then proposed. Afterwards, these strategies are extended to the proposed multi-tool optimization that further balances the run time of machine tools. Finally, the superiority of each strategy is carefully studied via simulation and experiment. The experiment is performed by bonnet polishing a 60 mm × 60 mm mirror with three tools of different diameters (i.e., 12 mm, 8 mm, and 5 mm). The figure error of the mirror is reduced from 45.42 nm to 11.18 nm root mean square in 13.28 min. Moreover, the measured polishing result well coincides with the estimation, which proves the effectiveness of the proposed method. © 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
dc.language.isoen
dc.publisherOptica Publishing Group (formerly OSA)
dc.rightsCopyright © 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement.
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/
dc.titleMulti-tool optimization for computer controlled optical surfacing
dc.typeArticle
dc.typetext
dc.contributor.departmentJames C. Wyant College of Optical Sciences, University of Arizona
dc.identifier.journalOptics Express
dc.description.noteOpen access journal
dc.description.collectioninformationThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at repository@u.library.arizona.edu.
dc.eprint.versionFinal published version
dc.source.journaltitleOptics Express
refterms.dateFOA2022-06-10T23:13:50Z


Files in this item

Thumbnail
Name:
oe-30-10-16957.pdf
Size:
6.541Mb
Format:
PDF
Description:
Final Published Version

This item appears in the following Collection(s)

Show simple item record