In situ annealing of nanoporous silicon thin films with transmission electron microscopy
Name:
241601_1_5.0181143.pdf
Size:
2.732Mb
Format:
PDF
Description:
Final Published Version
Affiliation
Department of Aerospace and Mechanical Engineering, University of ArizonaIssue Date
2023-12-11
Metadata
Show full item recordPublisher
American Institute of Physics Inc.Citation
Qin-Yi Li, Fabian Javier Medina, Kosuke Kokura, Zheyu Jin, Koji Takahashi, Qing Hao; In situ annealing of nanoporous silicon thin films with transmission electron microscopy. Appl. Phys. Lett. 11 December 2023; 123 (24): 241601. https://doi.org/10.1063/5.0181143Journal
Applied Physics LettersRights
© 2023 Author(s). Published under an exclusive license by AIP Publishing.Collection Information
This item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at repository@u.library.arizona.edu.Abstract
Nanoporous films have potential applications in thermoelectric cooling on a chip, sensors, solar cells, and desalination. For phonon transport, amorphization and other pore-edge defects introduced by the nanofabrication processes can eliminate wave effects by diffusively scattering short-wavelength phonons and thus destroying the phonon phase coherence. As a result, phononic effects can only be observed at 10 K or below, when long-wavelength phonons become dominant for thermal transport. In this work, a 70-nm-thick silicon thin film with approximately 100-nm-diameter nanopores was annealed under a high vacuum, and the change of pore-edge defects was observed with in situ transmission electron microscopy. It was found that the pore-edge defects can be minimized to a sub-1-nm layer by annealing between 773 and 873 K for 30 min, without changing the pore sizes. The largely reduced pore-edge defects are critical to the desired phonon wave effects within a periodic nanoporous structure. © 2023 Author(s).Note
12 month embargo; first published 11 December 2023ISSN
0003-6951Version
Final Published Versionae974a485f413a2113503eed53cd6c53
10.1063/5.0181143
